Different cmake error but still problems on Pi3. No problems with 2.6.1

Greg g4cui

Making all in tests
libtool: link: gcc -Wall -g -O2 -fPIC -fdata-sections -ffunction-sections 
-Wl,--gc-sections -o rigctl rigctl-rigctl.o rigctl-rigctl_parse.o 
rigctl-dumpcaps.o rigctl-dumpstate.o rigctl-rig_tests.o  
../src/.libs/libhamlib.a -lusb-1.0 ../lib/.libs/libmisc.a -ldl -lm -pthread
../src/.libs/libhamlib.a(yaesu.o): In function `initrigs4_yaesu':
/home/pi/Downloads/hamlib-prefix/src/hamlib/rigs/yaesu/yaesu.c:127: undefined 
reference to `ft9000Old_caps'
collect2: error: ld returned 1 exit status
Makefile:1118: recipe for target 'rigctl' failed
make[4]: *** [rigctl] Error 1
Makefile:632: recipe for target 'all-recursive' failed
make[3]: *** [all-recursive] Error 1
CMakeFiles/hamlib-install.dir/build.make:65: recipe for target 
'hamlib-prefix/src/hamlib-stamp/hamlib-build' failed
make[2]: *** [hamlib-prefix/src/hamlib-stamp/hamlib-build] Error 2
CMakeFiles/Makefile2:195: recipe for target 'CMakeFiles/hamlib-install.dir/all' 
failed
make[1]: *** [CMakeFiles/hamlib-install.dir/all] Error 2
Makefile:83: recipe for target 'all' failed
make: *** [all] Error 2

From: wsjt-devel-requ...@lists.sourceforge.net
Sent: 24 January 2024 16:46
To: wsjt-devel@lists.sourceforge.net
Subject: wsjt-devel Digest, Vol 119, Issue 42

Send wsjt-devel mailing list submissions to
        wsjt-devel@lists.sourceforge.net

To subscribe or unsubscribe via the World Wide Web, visit
        https://lists.sourceforge.net/lists/listinfo/wsjt-devel
or, via email, send a message with subject or body 'help' to
        wsjt-devel-requ...@lists.sourceforge.net

You can reach the person managing the list at
        wsjt-devel-ow...@lists.sourceforge.net

When replying, please edit your Subject line so it is more specific
than "Re: Contents of wsjt-devel digest..."


Today's Topics:

   1. Re: Making F/H idiot proof (Reino Talarmo)
   2. Re: Making F/H idiot proof (Jeff Stillinger)


----------------------------------------------------------------------

Message: 1
Date: Wed, 24 Jan 2024 18:13:10 +0200
From: "Reino Talarmo" <reino.tala...@kolumbus.fi>
To: "'WSJT software development'" <wsjt-devel@lists.sourceforge.net>
Subject: Re: [wsjt-devel] Making F/H idiot proof
Message-ID: <009001da4ee0$3a06dca0$ae1495e0$@kolumbus.fi>
Content-Type: text/plain; charset="utf-8"

Hi, I think that the Fox simply ignores the ?R+rpt? part of the message and 
takes it to be a Tx1 message. So Fox sends a report. The Hound station autoseq 
may not work correctly as it has not sent the Tx1 at all. A resending of the 
?R+rpt? should be a correct message. The Hound station sends only Tx1 and Tx3 
in the protocol. Fox should not response by RR73, if it has not sent a Tx2 and 
received after that a R+rpt. No short-cuts allowed.

Well, it is another issue how to get operators to read user guides!

 

73, Reino OH3mA

 

From: Andy Durbin via wsjt-devel [mailto:wsjt-devel@lists.sourceforge.net] 
Sent: Wednesday, January 24, 2024 5:48 PM
To: Brian Moran <brian.mo...@gmail.com>; WSJT software development 
<wsjt-devel@lists.sourceforge.net>
Cc: Andy Durbin <a.dur...@msn.com>
Subject: Re: [wsjt-devel] Making F/H idiot proof

 

Hi Brian,

 

The screen shot and the discussion are in the Clipperton groups.io messages.  
Clipperton is certainly using WSJT-X and operating as Fox.  It appears the 
"user" saw a TX5S CQ and replied with TX3.  TX5S responded with TX2.  

 

ref - https://groups.io/g/Clipperton-2024/message/388

 

You may need to sign up for the group to read messages.  Private email if you 
like me to send a copy of the screen shot.  I don't think this "list" will 
allow images.

 

73,

Andy, k3wyc

  _____  

From: Brian Moran <brian.mo...@gmail.com <mailto:brian.mo...@gmail.com> >
Sent: Wednesday, January 24, 2024 8:36 AM
To: WSJT software development <wsjt-devel@lists.sourceforge.net 
<mailto:wsjt-devel@lists.sourceforge.net> >
Cc: Andy Durbin <a.dur...@msn.com <mailto:a.dur...@msn.com> >
Subject: Re: [wsjt-devel] Making F/H idiot proof 

 

Hi Andy; can you please help me understand the circumstances better?  

Under ?normal? f/h operation, the hound calls with a grid. WSJT-X in fox mode 
can queue a caller with a grid. WSJT-X in fox mode doesn?t queue 
non-grid-supplying callers. 

 

If the ?fox? replied to a signal report message as the first call, perhaps the 
fox wasn?t using f/h mode? Perhaps not using wsjt-x?

 

The calling operator could have used the manual message selection buttons to 
change their message to the ?fox? reflecting the circumstances, and they could 
have manually logged the station at the appropriate point in the sequence. It 
seems they might have partially done that, since if I understand what you are 
writing, they found and started with the TX3 message. 

 

If you could point me to more information and the screenshot, I?d like to 
follow up to understand this situation better. 

 

Thanks,

-Brian N9ADG

 

Sent via iPhone





On Jan 24, 2024, at 7:16?AM, Andy Durbin via wsjt-devel 
<wsjt-devel@lists.sourceforge.net <mailto:wsjt-devel@lists.sourceforge.net> > 
wrote:

? 

As implemented in WSJT-X ver 2.6.1 the hound is able to select TX3 as their 
first transmission.  One user has posted a screen shot showing that fox replied 
with a signal report but the QSO could not be completed.

 

Since new WSJT-X ops seem reluctant to read the instructions would the 
developers please consider making TX3 unselectable until a signal report has 
been received.

 

Thanks and 73,

Andy, k3wyc

_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net <mailto:wsjt-devel@lists.sourceforge.net> 
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

-------------- next part --------------
An HTML attachment was scrubbed...

------------------------------

Message: 2
Date: Wed, 24 Jan 2024 10:30:36 -0600
From: Jeff Stillinger <kb6...@zohomail.com>
To: wsjt-devel@lists.sourceforge.net
Subject: Re: [wsjt-devel] Making F/H idiot proof
Message-ID: <d39a8513-fbaf-400b-8c89-da43c82cd...@zohomail.com>
Content-Type: text/plain; charset="utf-8"; Format="flowed"

Having read and seen much of the same.?? I agree that F/H needs some 
work.??? Andy is spot on about the user base not reading and following
instructions.?? Therefore, we do need forced compliance with the message 
format.?? Of course there will be a lot of whining about it, but the 
Clipperton DXE is a total mess right now.? There are WSJT-X operators 
that only use WSJT-X for F/H mode and DXEs.?? They are not aware of the 
most current news, information, and operational changes as they don't 
participate with the group email lists on a daily basis.? The software 
needs to help them out.

Honestly, even with daily FT8 operations between all of the short cuts 
people are taking with the message format, combined with heavy 
filtering, has FT8 a total mess.?? It's a wonder people get QSLs for 
awards it's so messy.

On 1/24/24 09:07, Andy Durbin via wsjt-devel wrote:
> As implemented in WSJT-X ver 2.6.1 the hound is able to select TX3 as 
> their first transmission.? One user has posted a screen shot showing 
> that fox replied with a signal report but the QSO could not be completed.
>
> Since new WSJT-X ops seem reluctant to read the instructions would the 
> developers please consider making TX3 unselectable until a signal 
> report has been received.
>
> Thanks and 73,
> Andy, k3wyc
>
>
> _______________________________________________
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel

-- 
Jeff Stillinger - KB6IBB
KB6IBB Laboratories, Wylie Tx
r/KB6IBBSWLLogger
http://kb6ibb-15.ham-radio-op.net/
-------------- next part --------------
An HTML attachment was scrubbed...

------------------------------



------------------------------

Subject: Digest Footer

_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel


------------------------------

End of wsjt-devel Digest, Vol 119, Issue 42
*******************************************

_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Reply via email to