While working CB0ZEW on 12M FT8, the Band Activity column displayed the
initial report message that I received as well as the RR73 message which
followed.
[image: image.png]

However, the initial message with calls and report *never appeared in the
RX frequency column*.

Only the RR73 line appeared. Below, you can see me (K1HTV) calling CB0ZEW
at 23:47:30.

The 23:48:00 message from CB0ZEW, is seen on the Band Activity column *but
not in the RX Freq window*. Only the message of CB0ZEW sending a -19 report
to W6VJT is seen at 23:48:00 and not the message to me from CB0ZEW which
appeared in the BA column.
[image: CB0ZEW-RXfreq-window.JPG]

Earlier, using F/H, I was moved down from my calling tone frequency to the
transmit frequency of CB0ZEW. After 3 retries there and another 3 up 300 Hz
the QSO was not complete.

For the QSO shown above, I  switched off the F/H mode and called again,
this time  on 2283 Hz.  CB0ZEW answered my call and we completed our QSO
while I continued transmitting  my TX tone  frequency.

I have seen this before, but it hasn’t happened very often.

73,

Rich – K1HTV
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Reply via email to