Please place this file as described below https://www.dropbox.com/s/t52ngcalsgnpm8m/wsjtx_log_config.ini?dl=0
C:\Users\[username]\AppData\Local\WSJT-X The WSJT-X_Rigcontrol.log file will be in the same location Here's a youtube video showing Windows users howto -- https://www.youtube.com/watch?v=q9tAvhNmSvc For Linux put it in ~/.config The WSJT-X_Rigcontrol.log file will be here: ~/.local/share/WSJT-X For MacOS put it in /Users/[username]/Library/Preferences Restart WSJT-X and duplicate the problem. Shut down WSJT-X Then send me the WSJT-X_RigControl.log file Mike W9MDB On Sunday, June 2, 2024 at 03:40:58 PM CDT, Andrew Neumeier via wsjt-devel <wsjt-devel@lists.sourceforge.net> wrote: Hi all, Having a intermittent issue with WSJTX and my Orion, model 565. Seems that the key line is hanging or sometimes late in transmiting. This does not happen all the time. At times the rig may not transmit until after several seconds of a FT8 sequence have passed, at times it is late returning to receive, again by up to three seconds. I have tried several different speed usb ports, reduced the tx delay in settings to zero, and have increased or decreased the polling of the rig, all to no avail. This problem seems a bit worse under Windows 10 than Kubuntu Linux 22.04. I am using a xggcomm audio interface for audio in and out, and rig is keyed via a serial/usb converter. The computer should be plenty fast enough to handle this, it is about two years old. This all happens even if I am not using the computer for anything else at all aside from WSJTX. Any ideas out there? 73, Andy, ka2uqw _______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel _______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
