Pete,
It's possible to key in the serial or usb port manually, using the keyboard.
Use the pulldown list and you will probably see USB listed. You can type this
in yourself in place of USB, but you need to determine first which port the rig
is connected to first.
73,Andy, ka2uqw
On Tuesday, July 2, 2024 at 01:57:41 PM EDT, Peter LaBissoniere via
wsjt-devel <[email protected]> wrote:
I have a M2 MacBook running MacOS 14.5. The serial ports from my Yaesu FT-891
show up on the MacOS system report (USB section - Silicon Labs CP2105) but they
do not show up in the serial port list on WSJT-X 2.6.1 (or 2.7.0) Radio
Settings. It worked fine with my former Intel MacBook. I’m using a Digi-Rig for
the audio CODEC which is working. The serial ports from the Digirig show up
(Silicon Labs CP2102N) in WSJTX but I need to use the serial port built into
the FT-891 for CAT. Not sure if this is a bug or some config issue.
Thanks Pete - KW9E
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
