There's no difference -- just when WSJTX compiles it adds it's own prefix to rigctld.
Mike W9MDB On Saturday, July 6, 2024 at 08:54:30 PM CDT, Marco Calistri <py1...@outlook.com> wrote: Hi Mike! So far I always used hamlib rigctld. Could you be so kind to explain what differs the two and which is advisable to use? Many thanks! Marco, PY1ZRJ Inviato da Outlook per Android ________________________________ Da: Black Michael via wsjt-devel <wsjt-devel@lists.sourceforge.net> Inviato: Sabato, Luglio 6, 2024 1:30:23 PM A: WSJT software development <wsjt-devel@lists.sourceforge.net> Cc: Black Michael <mdblac...@yahoo.com> Oggetto: Re: [wsjt-devel] [OT] Hamlib string for IC7300 Are you using rigctld-wsjtx ? Are you running WSJT-X already? You need to shut down WSJT-X, start rigctld-wsjtx, then select Hamlib NET rigctl in WSJT-X. Mike W9MDB On Saturday, July 6, 2024 at 11:11:39 AM CDT, wsjtx-dev--- via wsjt-devel <wsjt-devel@lists.sourceforge.net> wrote: Hi everyone, I successfully use an IC7300 with WSJTX. I would like to connect the radio via rigctld, but I can't connect, my string is: rigctld -m 3073 -r /dev/ttyUSB0 -s 19200 -vvvv Where am I wrong? The IC7300 works perfectly when connected directly via WSJTX, I was able to use a TS2000 perfectly via rigctld, so I think I'm doing something wrong in the 7300's configuration string. Thank's to all IZ0KBA _______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel _______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel _______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
