New hamlib for installation directions
#1 Shut down WSJTX #2 Download either the 32-bit or 64-bit DLL matching the 32/64-bit version of WSJTX -- hopefully your browser doesn't block it but may warn you multiple times. If you can do a "Save As" you can save it directly in the appropriate WSJTX directory C:\WSJT\WSJTX\bin and replace the libhamlib-4.dll that is there. http://n0nb.users.sourceforge.net/dll32/libhamlib-4.dll http://n0nb.users.sourceforge.net/dll64/libhamlib-4.dll Linux/Unix/Mac users need to compile the latest tar file from http://n0nb.users.sourceforge.net Note: If compiling on Unix-like systems please uninstall any Hamlib package you have before installing the new build #3 If you don't save directly you need to open a file browser and move the file that way. If you're not familiar with that here's a video on the file browser - https://www.youtube.com/watch?v=AyVqCJrs9dk Once installed on Linux do "ldconfig". rigctl --version should then show a relatively recent date of the download Mike W9MDB On Wednesday, July 17, 2024 at 11:38:24 PM CDT, Richard L Kohlhaas via wsjt-devel <wsjt-devel@lists.sourceforge.net> wrote: I am just now trying to start using WSJT. I can receive, but not transmit. When I open the program I get a Rig Control Error, with invitation to reconfigure the radio. There is noting to adjust there, except Test Transmit, and then I get Rig Failure. The same connections to the radio( Icom 718) are used for Digipan/PSK31 which works fine. I am on COM3 for the PTT Any ideas? Dick W5UDM _______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel _______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
