I had something similar with RC5 on my Flex Radio where: Called FOX FOX Answered with report. RC5 commanded the radio into transmit but no RF output. Two replies from the FOX passed with no RF reply from my rig. Was looking around to learn the problem. Finally clicked the DAX TX icon on the DAX panel to restore the audio connection. Fortunately the FOX K8R completed the Q and I was in the log. Never had anything like this happen in all the years on WSJT-X or after this incident.
Bill W2PKY On Sat, Jul 20, 2024 at 12:25 AM Jim Shorney via wsjt-devel < wsjt-devel@lists.sourceforge.net> wrote: > > Thanks to Joe and the team for the work on -rc6. I worked K8R on 15m today > at -10 with consistent decodes. However his signal report to me was printed > after the TX Enable had turned itself off an it did not re-enable when it > saw the fox reply as I have seen classic F/H do in the past. I was quick > enough to save the Q but I was wondering if this is intended behavior? > > -- > > 73 > > -Jim > NU0C > > > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel >
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
