On 7/23/2024 10:57 AM, Andy Durbin K3WYC via wsjt-devel wrote:
"I still don't understand why 21.091 was recorded correctly but 14.091
was not. I'll continue to monitor unless the development team indicates
the problem is understood."
I thought I had responded to this thread before, but perhaps I'm mistaken.
As things are presently coded, retuning your rig with front panel
controls (the "big knob") does NOT change the nominal frequency that you
have selected from the drop-down list. That's the frequency that will
be written to ALL.TXT and posted to PSK Reporter, etc.
One reason this can make sense is that you want to be on 14.074 MHz, say
-- or perhaps on 1296.065 MHz, for EME -- but you know that on that band
your dial calibration is off by -220 Hz. So, you select 14.074 in the
drop-down list and then tweak the dial by the necessary +220 Hz.
Everything will then be recorded and posted correctly.
If you want to be on 14.091 and have things recorded and posted as
14.091, type "14.091" into the drop-down control. Better still, put
14.091 into your frequencies list. If you're already on 20 meters, say
14.074, you can type "91k" (for kHz) into the drop-down list.
-- 73, Joe, K1JT
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
