If the instructions are to use manual entry or frequency drop down then then I
find no such limitation in the user guide. Even if these were the only methods
used to set rig frequency the undocumented amber on red frequency display may
still be present.
The majority of WSJT-X users will not have read any instuctions you may have
given me. Even those who have read all the published documentation will not be
aware that they could be producing misleading spots if they use generally
accepted methods of rig tuning.
You appear to be willing to accept that users of your software may, when
operating within all the constraints of the user guide, produce misleading
spots on PSKReporter.
I simply do not understand your position. However, my obligation as an RC user
was to report any issues that I have observed. I have done that and more.
Andy, k3wyc
________________________________
From: Joseph Taylor <j...@princeton.edu>
Sent: Wednesday, July 31, 2024 6:58 AM
To: WSJT software development <wsjt-devel@lists.sourceforge.net>
Cc: Andy Durbin <a.dur...@msn.com>
Subject: Re: [wsjt-devel] ALL.TXT RX freq is not RX DIAL freq (Reino Talarmo)
On 7/31/2024 9:32 AM, Andy Durbin via wsjt-devel wrote:
> The problem I reported can be fixed either by using dial
> frequency or by using dial frequency + tone offset.
You seem unwilling to accept that the "problem" you reported does not
exist if you follow the instructions we gave you. Repeatedly.
-- Joe, K1JT
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
