Hi Scott,
Thanks for the detailed report -- it's much appreciated. We will make
sure to improve the program's gracefulness in handling this condition.
-- Joe, K1JT
On 9/30/2024 10:58 PM, Scott Armstrong via wsjt-devel wrote:
Hi All,
The following Subprocess Error (see below) was observed while running
rc7 and is repeatable.
It is not observed in rc6.
The following actions were taken to trigger the error.
1. Launch WSJT-X 2.7.0-rc7
2. Set to Super Hound mode.
3. Set the Tx DF to a DF greater than 1450 Hz by either shift left
click in the waterfall or by typing a value in the Tx box.
4. Set the Rx frequency to Tx frequency by clicking the down arrow
button to the right of the F Tol box.
This is not a valid configuration if the Rx frequency needs to be at or
near 750 Hz. The SW is not handling the error gracefully or the
functionality to set the Rx to the TX needs to be disabled.
Let me know if additional info is needed.
Scott AA5AM
Subprocess Error
Subprocess failed with exit code 2
Running: C:\RADIO\WSJT2.7.0_rc7\bin\jt9 -s "WSJT-X - IC756P2" -w 1 -m 1
-e C:\RADIO\WSJT2.7.0_rc7\bin -a "C:\Users\computer\AppData\Local\WSJT-X
- IC756P2" -t "C:\Users\computer\AppData\Local\Temp\WSJT-X - IC756P2"
At line 48 of file
C:\JTSDK64-Tools\WSJTX\BBdevelop\lib\superfox\sfox_remove_tone.f90
Fortran runtime error: Index '48345' of dimension 1 of array 's' outside
of expected range (45000:1)
Error termination. Backtrace:
Could not print backtrace: libbacktrace could not find executable to open
#0 0xffffffff
#1 0xffffffff
#2 0xffffffff
#3 0xffffffff
#4 0xffffffff
#5 0xffffffff
#6 0xffffffff
#7 0xffffffff
#8 0xffffffff
#9 0xffffffff
#10 0xffffffff
#11 0xffffffff
#12 0xffffffff
#13 0xffffffff
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
