Nic G3YEG here.
I have been running a 9700 with wsjt under windows 11 for over a year
without any significant issues up to RC6
Loaded RC7 recently and noted that while running FT8 on 144 I was seeing
wsjt stopping in the tx cycle (no error message) and sometimes with an
error message. It didnt have this problem when running 432 Q65 tx.
This looked like an RFI issue as reducing the power output of the 9700
on 144 seemed to make it go away. However it did still occur but not as
frequently.
Tried all sorts of ferrites etc and still it persisted.
This was the error message when it fell over the other day. I have
seen other error messages
I was not sure that is an rfi issue or pc issue or hamlib as it
looks like it errored when starting the tx cycle ?
Hamlib error: rig_token_lookup called for client
rig_confparam_lookup called for client
rig_set_conf called
rig_confparam_lookup called for 1073741961
rig_set_conf: client='WSJTX'
frontend_set_conf: Client claims to be WSJTX
rig.c(939):rig_open entered
rig_settings_get_path: path=\Users\nicse/.hamlib_settings
rig_open: cwd=C:\WSJT\wsjtx
rig_open: C:\WSJT\wsjtx/hamlib_settings No such file or directory
rig_open: async_data_enable=0, async_data_supported=1
serial_open: COM3
serial_open(230): open failed#1 No such file or directory
serial_open: Unable to open COM3 - No such file or directory
port_open: serial_open(COM3) status=-6, err=No such file or directory
rig_open: rs->comm_state==0?=0
rig.c(1168):rig_open returning2(-6) IO error
IO error
IO error
while opening connection to rig
Timestamp: 2024-12-23T19:22:45.149Z
-------------------------------------------------------
Yesterday I tried running with an old version of Hamlib (4.5.4) and
it ran cleanly for several hours with no issues at all !!
Anyone any ideas ?
Thanks Nic G3YEG
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
