Check the polling rate between the two.
Something funky is going on in the fast polling...I'm trying to track it down.
Mike W9MDB
On Thursday, January 9, 2025 at 03:41:21 PM CST, Gerrie Goeree
<[email protected]> wrote:
Mike, Uwe,
I can confirm I had the same Hamlib.dll's in both tests I just repeated.
In my case I needed to paste the Hamlib 4.6 ~git 2024-12-04T23:15:35Z
SHA=be045d 64-bit version into WSJT-X v2.7.0-rc8 after install, why exactly is
now not so important....
The attachment holds a .zip-file in which from both installs hold the
WSJT-X_RigControl.log files.
In the functional version I dialed my TS2000x from 1296.080.0 up to 1296.090.0
in 1kHz per second. The screen in Astronomical data as well as the main-screen
followed and displayed nicely the RIG-frequency.
In the version which does NOT follow the frequency, I increased from 1296.060.0
up to 1296.070.0 also in 1kHz per second. The wsjt-x windows remained fixed at
1296.065.0
Gerrie, PA3EXV
Op 09-01-2025 21:47 CET schreef Black Michael <[email protected]>:
For the regular WSJTX place this file in the same location as WSJT-X.ini
You will find WSJT-X_RigControl.log in the same location.
https://www.dropbox.com/scl/fi/gegtdtb29p9wxnpyltzur/wsjtx_log_config.ini?rlkey=5ghvsgskydkchl0aowx5xfb41&dl=1
Mike W9MDB On Thursday, January 9, 2025 at
02:13:47 PM CST, Gerrie Goeree <[email protected]> wrote:
Hallo Uwe,
After your mail, I checked, and tried to repair.....
My findings, the versions of Hamlib are NOT the same for the versions I
checked, more detail in below text:
Follows Radio dial (without holding Ctrl-key): WSJT-X v2.7.1-devel
250106-rc8 improved PLUS with Hamlib 4.6 ~git 2024-12-04T23:15:35Z SHA=be045d
64-bit Does NOT follow Radio dial (even when holding Ctrl-key), it reads
the frequency from the radio only once, during program start: WSJT-X
v2.7.0-rc8 with Hamlib 4.6~git 2023-12-13T23:28:31Z SHA=f81d49 64-bit
In the version WSJT-X v2.7.0-rc8, I tried as you mentioned to update the
version Hamlib, but all that happened was more than an hour the
'downloading...' message. I stopped trying after I did a 2nd attempt. Then I
grabbed the hamlib.dll version that came when installing the correct working
wsjt-firmware (Hamlib 4.6 ~git 2024-12-04T23:15:35Z SHA=be045d 64-bit),
installed the non-functional version again, and pasted the copied Hamlib.dll.
NO LUCK EITHER.....the WSJT-X v2.7.0-rc8 still does NOT follow the VFO-dial! I
opened the tab-field under 'radio' to check whether it uses the expected hamlib
as from the functional version, and it did.
Then per advice from Mike W9MDB, I have tried logging the faulty version WSJT-X
v2.7.0-rc8, but as this isn't a debug version, it doesn't let me create a
log_file. We can't compare to a logfile I was able to produce from the version
which DOES follow the frequency-dial on the TS2000x...
Conclusion:
It is not the hamlib.dll which causes the WSJT-X v2.7.0-rc8 no longer to follow
the radio dial....
Gerrie, PA3EXV
Op 09-01-2025 18:48 CET schreef Uwe, DG2YCB <[email protected]>: Hi
Gerrie, FYI: WSJT-X v2.7.1-devel 250106-RC8 improved PLUS and WSJT-X
v2.7.0-rc8 have the identical Hamlib version (and have been compiled on the
same computer). And for both program versions, you can very easily update
hamlib with one click (Windows only).
Furthermore, If you are working on Windows, you only need to replace a single
file ("libhamlib-4.dll") if there is any problem with your rig after a program
update which often brings also a new Hamlib version. It is always the same!
I've even created a tutorial about how to deal with rig control errors
(available in English and German).
My recommendation: If you have a "libhamlib-4.dll" version which works well
with your rig, backup it manually, so you can restore it in case the Update
Hamlib doesn't work for you - for whatever reason. I really don't understand
why so many OMs find it so difficult ...
73 de DG2YCB, Uwe _________________________________________
German Amateur Radio Station DG2YCB Dr. Uwe Risse eMail: [email protected]
Info: www.qrz.com/db/DG2YCB
Am 9. Januar 2025 16:51:41 schrieb Gerrie Goeree via wsjt-devel
<[email protected]>:
Hello Mike,
I think that is exactly the issue...
libhamlib-4.dll as it is distributed along with WSTJ-X v2.7.1-devel 250106-RC8
improved PLUS does follow the frequency-dial on the tS2000x like one would
expect.
However when I open the directory after I install WSJT-X v2.7.0-rc8, I see a
libhamlib-4_new.dll along with a libhamlib-4.dll. And then is doesn't follow
the frequency_dial anymore.
Gerrie, PA3EXV
Op 08-01-2025 20:45 CET schreef Black Michael via wsjt-devel
<[email protected]>: Upgrade Hamlib in the Radio tab
and see if that helps. Mike W9MDB On Wednesday,
January 8, 2025 at 12:24:14 PM CST, Gerrie Goeree via wsjt-devel
<[email protected]> wrote: Hello team,
Today I checked different versions of wsjt-x in combination to a TS2000x,
because I was checking some new features together with Charles, G3WDG.
My observation was in WSJT-X v2.7.0-rc8, the firmware does not follow the
radio-dial, even not when holding Ctrl pressed. For that reason and for your
team to possibly make the debugging easier, I compared older versions up to the
point the problem occurred (see list below).
I find the feature that the wsjt-x firmware simply follows the radio-dial very
convenient, not needing to use the keyboard shortcuts. I simply set the
Multi/CH dial on the TS2000x to 1kHz steps and can change very fast between
different stations in EME which mostly report their frequency in rounded kHz
steps. Follows Radio dial (even without holding Ctrl-key):
WSJT-X v2.7.1-devel 241014-rc7 improved AL PLUS
WSJT-X v2.7.1-devel 241014-rc7 improved PLUS
WSJT-X v2.7.1-devel 250106-rc8 improved PLUS Does NOT follows Radio
dial (even with holding Ctrl-key): WSJT-X v2.7.0-rc8
Hope it helps, will I receive feedback in my personal mail?
Gerrie, PA3EXV _______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
