Hi I had a very similar problem with my R8600. I did try to find the cause but gave up trying a debugging version of Hamlib. Versions of Hamlib before July 2024 work OK and I don't think there are any features lost as far as the R8600 is concerned. Regards
David Owen GM1OXB On Thu, Apr 17, 2025 at 6:59 PM Christopher Smith via wsjt-devel <wsjt-devel@lists.sourceforge.net> wrote: > > When upgrading to version 2.7.0 I can no longer control my Icom R8600. It was > working with earlier versions (2.6.1). > > I am running Windows 10 Pro. > > The program starts and shows the current radio frequency. (This seems to be > the case whether I start the program with the radio in the VFO mode or memory > mode - it has never mattered before.) > > When I use the frequency drop down box the frequency does not change. When I > try again I get a Rig Control Error box with details: > > > Hamlib error: > > icom.c(9652):set_vfo_curr returning2(-9) Command rejected by the rig > > > > icom.c(1595):icom_set_freq returning2(-9) Command rejected by the rig > > > > rig_set_cache_freq(171): vfo=VFOA, current_vfo=currVFO > > rig_set_freq: vfo=VFOA, save=currVFO > > *rig.c(2410) trace > > **2:rig.c(3333):rig_set_vfo entered > > rig_set_vfo called vfo=currVFO > > vfo_fixup:(from rig_set_vfo:3347) vfo=currVFO, vfo_curr=currVFO, split=0 > > vfo_fixup: Leaving currVFO alone > > **2:rig_set_vfo: elapsed=0ms > > **2:rig.c(3352):rig_set_vfo returning(0) > > *1:rig_set_freq: elapsed=31ms > > rig_lock: client lock disengaged > > *1:rig.c(2416):rig_set_freq returning(-9) Command rejected by the rig > > > > Command rejected by the rig > > Command rejected by the rig > > while setting frequency > > > > Timestamp: 2025-04-15T16:31:36.050Z > > When reverting to the previous hamlib version, but still running WSJT-X > version 2.7.0 I have the same problem. > > I might note the current FLDIGI embedded hamlib version works, to a point. I > can always set the frequency from the radio, but when I vary the frequency > from the radio, FLDIGI only follows it for a few changes, then the display > (on the program, not the radio) locks up. > > 73, > > Chris NX0E > > > > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel _______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
