Hello Reino! Thanks for the time you spent for the tests!
The main issues, IMHO are: what are the correct parameters both for the CW id time interval and the MSK T/R seconds? Since it's not much worth that CW-ID being working only with few parameters combination that we can't use for normal MSK144 mode. For example here in Brazil the T/R is normally set to 30 s. Best regards, Marco PY1ZRJ Inviato da Outlook per Android<https://aka.ms/AAb9ysg> ________________________________ From: Reino Talarmo <reino.tala...@kolumbus.fi> Sent: Tuesday, May 13, 2025 4:04:51 PM To: py1...@outlook.com <py1...@outlook.com>; 'WSJT software development' <wsjt-devel@lists.sourceforge.net> Subject: RE: [wsjt-devel] CW-ID is not being sent Hi Marco, I set up v2.7.0 GA (latest version) and selected in General the CW ID interwall to ‘1’. I listened to the audio and there is my CW id once a minute! When I set T/R to 5 s, then the CW ID replaces the first MSK144 transmission. When the T/R period is longer, then the last 5 s of the transmission is replaced. If I also select CW ID after 73, then the last 5 s of the ‘73’ message is stolen for the CW ID. The once a minute CW ID transmission may not be the first time of the minute. At least with 10 s T/R sends it at 45 seconds mark. At T/R 5 s the whole ‘73’ message is stolen and no ’73’ is sent (may be a bug). The CW ID seems to work. 73, Reino OH3mA From: Marco Calistri via wsjt-devel <wsjt-devel@lists.sourceforge.net> Sent: Tuesday, May 13, 2025 12:25 AM To: wsjt-devel@lists.sourceforge.net Cc: Marco Calistri <py1...@outlook.com> Subject: Re: [wsjt-devel] CW-ID is not being sent Hi Andy! In reality I was asking in general the correct usage of CW-ID, which at least here it seems is not working. Then I would like to get the confirmation about it. Best regards, Marco, PY1ZRJ
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
