Cool, I can use this for my Novatel EX720 ExpressCard. (Uses USB mode ExpressCard, and therefore the same driver)
James On Oct 24, 2007, at 2:24 PM, Peter Lees wrote: > whoohoo - i'm sending this via hsdpa (3g) wireless modem from > opensolaris > > sony vaio pcg-z1vgp laptop > opensolaris b74 > <a href="http://opensolaris.org/os/community/laptop/wireless/ > cardbus/">alternate cardbus driver</a> > <a href="http://www.novatelwireless.com/products/expresscard/merlin- > xu870.html">novatel wirless Merlin XU870 3G HSDPA 3.6/7.2 Mbps > ExpressCard</a> > ('3' wireless broadband account: http://www.three.com.au) > > in addition to connecting the card to the usbsacm driver (above) i > did this: > > # ln -s /dev/term/0 /dev/hsdpa > > - created /etc/ppp/peers/3netconnect as below: > <code> > nodetach > /dev/hsdpa > 230400 > crtscts > holdoff 1 > noauth > asyncmap 00000000 > passive > defaultroute > usepeerdns > noccp > novj > lcp-echo-interval 0 > connect '/usr/bin/chat -V -t15 -f /etc/ppp/3netaccess-chat' > </code> > > and a chat script as below: > <code> > connect '/usr/bin/chat -V -t15 -f /etc/ppp/3netaccess-chat' > when:/etc/ppp/peers# cat ../3netaccess-chat > 'ABORT' 'BUSY' > 'ABORT' 'NO CARRIER' > '' 'AT' > 'OK' 'ATD *99#' > CONNECT '\d\c' > </code> > > my wireless broadband account doesn't use a username or password - > it uses the SIM card for authentication > > i added an /etc/ppp/ip-up script to copy the /etc/ppp/resolv.conf > file into /etc/resolv.conf, and an /etc/ppp/ip-down script to > restore the original resolv.conf > > now all i want is a pretty front-end gui to pppd to turn the > connection on & off > -- > This messages posted from opensolaris.org > _______________________________________________ > wwan-discuss mailing list > wwan-discuss at opensolaris.org > http://mail.opensolaris.org/mailman/listinfo/wwan-discuss
