Thanks Michael ,

pci bus 0x000c cardnum 0x00 function 0x00: vendor 0x*14e4* device 0x*4315*
 Broadcom Corporation BCM4312 802.11b/g
 CardVendor 0x1028 card 0x000c (Dell, Wireless 1397 WLAN Mini-Card)
  STATUS    0x0010  COMMAND 0x0106
  CLASS     0x02 0x80 0x00  REVISION 0x01
  BIST      0x00  HEADER 0x00  LATENCY 0x00  CACHE 0x10
  BASE0     0xf69fc000 SIZE 16384  MEM
  BASEROM   0x00000000  addr 0x00000000
  MAX_LAT   0x00  MIN_GNT 0x00  INT_PIN 0x01  INT_LINE 0x03

but i use  : add_drv -i ??pci14e4,4315?' and doen't work


Gonzalo Seoane



2009/10/8 Michael Li <Mikore.Li at sun.com>

>
> Gonzalo Seoane wrote:
>
> Hi everyone .
>
> I have this issue with BCM4312 on a DELL LATITUDE E4300 .
>
> I'm running 32bit OpenSolaris and i follow with good results the ndis
> install but at end of that i have this problem :
>
> root at opensolaris:/export/home/gonzas/Downloads/ndis-1.2.4/i386# add_drv -i
> '"pci14e4,4311"' bcmndis
> devfsadm: driver failed to attach: bcmndis
> Warning: Driver (bcmndis) successfully added to system but failed to attach
>
>
> When i check ndis module i get this output :
>
> root at opensolaris:/export/home/gonzas/Downloads/ndis-1.2.4/i386# modinfo |
> grep ndis
> 264 f5ad51dc 1afaf8 265   1  bcmndis (Ndiswrapper 1.2.3)
> 265 f5ade394   b3e0   -   1  ndisapi (NDIS API 1.2.3)
>
> that's a version report bug, I will update it.
>
>
>
> If i run ifconfig -a :
>
> root at opensolaris:/export/home/gonzas/Downloads/ndis-1.2.4/i386# ifconfig
> -a
> lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232
> index 1
>     inet 127.0.0.1 netmask ff000000
> e1000g0: flags=1004843<UP,BROADCAST,RUNNING,MULTICAST,DHCP,IPv4> mtu 1500
> index 2
>     inet 192.168.1.27 netmask ffffff00 broadcast 192.168.1.255
>     ether 0:24:e8:92:6d:c4
> lo0: flags=2002000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv6,VIRTUAL> mtu 8252
> index 1
>     inet6 ::1/128
> e1000g0: flags=2004841<UP,RUNNING,MULTICAST,DHCP,IPv6> mtu 1500 index 2
>     inet6 fe80::224:e8ff:fe92:6dc4/10
>     ether 0:24:e8:92:6d:c4
>
>
> scanpci -v output :
>
> pci bus 0x000c cardnum 0x00 function 0x00: vendor 0x14e4 device 0x4315
>  Broadcom Corporation BCM4312 802.11b/g
>
> You need to use alias "pci14e4,4315", not just cut &paste "4311" from
> webpage.
>
> -  Michael
>
>
>
> Wi-Fi doesn't work!
>
> Thanks
>
>
>
>
> Gonzalo Seoane
>
> ------------------------------
>
> _______________________________________________
> wwan-discuss mailing listwwan-discuss at 
> opensolaris.orghttp://mail.opensolaris.org/mailman/listinfo/wwan-discuss
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: 
<http://mail.opensolaris.org/pipermail/wwan-discuss/attachments/20091008/851a0536/attachment.html>

Reply via email to