I am connecting a palm centro to a macbook pro. usbsacm finds the device and loads
Nov 12 21:33:47 lc8 usba: [ID 912658 kern.info] USB 1.10 device (usb830,61) operating at full speed (USB 1.x) on USB 1.10 root hub: device at 2, usb_mid5 at bus address 3 Nov 12 21:33:47 lc8 usba: [ID 349649 kern.info] Palm, Inc. Handheld PalmSN12345678 Nov 12 21:33:47 lc8 genunix: [ID 936769 kern.info] usb_mid5 is /pci at 0,0/pci8086,2834 at 1a/device at 2 Nov 12 21:33:47 lc8 genunix: [ID 408114 kern.info] /pci at 0,0/pci8086,2834 at 1a/device at 2 (usb_mid5) online Nov 12 21:33:47 lc8 usba: [ID 349649 kern.info] usba: no driver found for interface 0 (nodename: 'interface') of Palm, Inc. Handheld PalmSN12345678 Nov 12 21:33:51 lc8 genunix: [ID 408114 kern.info] /pci at 0,0/pci8086,2834 at 1a/device at 2 (usb_mid5) offline Nov 12 21:33:52 lc8 usba: [ID 912658 kern.info] USB 1.10 device (usb830,127e) operating at full speed (USB 1.x) on USB 1.10 root hub: communications at 2, usbsacm4 at bus address 3 Nov 12 21:33:52 lc8 usba: [ID 349649 kern.info] Mobile Stream Centro USB Modem CENTRO Nov 12 21:33:52 lc8 genunix: [ID 936769 kern.info] usbsacm4 is /pci at 0,0/pci8086,2834 at 1a/communications at 2 Nov 12 21:33:52 lc8 genunix: [ID 408114 kern.info] /pci at 0,0/pci8086,2834 at 1a/communications at 2 (usbsacm4) online /dev/term/1 is created as a communications device. ls -l /dev/term total 2 lrwxrwxrwx 1 root root 62 2009-04-05 19:10 0 -> ../../devices/pci at 0,0/pci106b,a0 at 1d/communications at 1/modem at 0:0 lrwxrwxrwx 1 root root 56 2009-11-12 21:33 1 -> ../../devices/pci at 0,0/pci8086,2834 at 1a/communications at 2:0 But when I tip to the modem it connects but does not echo back my keystrokes or respond to commands. # tip /dev/term/1 connected Any suggestions would be appreciated. I am on build 125. -- This message posted from opensolaris.org
