Update: I tried to copy only the running /opt/x2gothinclient and the /srv/tftp/ from an old running installation (install from 2012/01/17) And it's running perfect.
I found out, that there are some changes in the structure (or something missing) under the old running structure I have a folder /opt/x2gothinclient/chroot/usr/lib/nx/X11 under the new I didn't. --- okay next I did a chroot in each environment an checked the installed packages --- working: x2go-keyring 2011.12.07+squeeze~main~12~build1 x2gocdmanager 1.0.1.3-0~x2go1.1+squeeze~main~274~build1 x2goclient 3.99.0.3-0~x2go4+squeeze~main~129~build1 x2gosmartcardrules 1.0.1.3-0~x2go1.1+squeeze~main~274~build1 x2gothinclient 1.0.1.3-0~x2go1.1+squeeze~main~274~build1 x2gothinshutdown 1.0.1.3-0~x2go1.1+squeeze~main~274~build1 x2gousbmount 1.0.1.3-0~x2go1.1+squeeze~main~274~build1 libnx-x11 2:3.5.0.2-0+squeeze~main~199~build1 nxproxy 2:3.5.0.2-0+squeeze~main~199~build1 not working: pinentry-x2go 0.7.5.0-0~x2go1+squeeze~main~12~build1 x2go-keyring 2011.12.07+squeeze~main~12~build1 x2gocdmanager 1.0.1.6-0~x2go2+squeeze~main~306~build1 x2goclient 3.99.1.1-0~x2go1+squeeze~main~194~build1 x2gosmartcardrules 1.0.1.6-0~x2go2+squeeze~main~306~build1 x2gothinclient 1.0.1.6-0~x2go2+squeeze~main~306~build1 x2gousbmount 1.0.1.6-0~x2go2+squeeze~main~306~build1 nxproxy 2:3.5.0.12-0+squeeze~main~298~build1 So far I get to the point, where I just use the old working setup, but I'll test so that updating/upgrading work in future. But I still run around that point, that it has something todo with xauth, but deleting the .Xauthority has no effect. xauth list brings 2 entrys ... But actually I'm not so deep inside xauth/X11 forward so I still have to go deeper inside. Maybe now a hint from anybody ? Brgds T. Am 20. März 2012 19:46 schrieb TorBaTux <[email protected]>: > Hi Stefan, > > Today I reinstalled the whole system, the only change I made was to switch > from ubuntu 10.04 amd64 Server to ubuntu 10.04 amd64 desktop but still the > same failure. So I guess there is some error with X11 auth inside the tce. > I'll go deeper inside tomorrow. > > Keep you informed > > Brgds Torsten > > > Am 19.03.2012 um 17:36 schrieb "Stefan" <[email protected] > >: > > > > > Hi Torsten, > > > > from your description and from the log-files it looks exactly like the > problem > > I described in the mail with subject: > > > > Error: Aborting session with 'Unable to open > > > > from yesterday. > > Unfortunately I'm not any further ... > > > > Hope anybody has an hint. > > cheers > > Stefan > > > > Am Monday 19 March 2012 schrieb Torsten Bade: > >> Hi all, > >> I have actually the problem to connect via TCE to the server (fresh > >> install), > >> when I use the normal Client under e.g. Ubuntu, there is no problem, I > can > >> connect, work etc. > >> The problem itself is only with TCE and I'm running in circles. > >> System Ubuntu 10.04 amd64, Gnome > >> x2goserver/xsession: 3.1.0.1 > >> x2gognomebindings: 2.0.1.3 > >> > >> Client boot up via pxe, everything perfect ... but then, when I try to > >> connect: > >> I get the popup Message : > >> Connection failed head: cannot open > >> /home/<username>/.x2go/C-XXXXXXXXXXX_stDGNOME-dp32/cmdoutput' for > reading: > >> No such file or directory sed: -e expression #1, char 4: unterminated > 's' > >> command. > >> > >> When I say 'Show details' I get: > >> > >> --->> SNIPP Show details <<--- > >> Proxy running in client mode with pid xxx > >> Session: Starting session at xxx > >> Info: Connecting to remote host 'localhost:31252'. > >> (Here I was confused about localhost) > >> Connection timeout, abortingInfo: Aborting the procedure due to signal > >> '15'. --->> SNAPP Show details <<--- > >> > >> --->> SNIPP User Session.log <<--- > >> running as X2Go Agent > >> > >> NXAGENT - Version 3.5.0 > >> > >> Copyright (C) 2001, 2011 NoMachine. > >> See http://www.nomachine.com/ for more information. > >> > >> Info: Agent running with pid '8932'. > >> Session: Starting session at 'Fri Mar 16 18:28:17 2012'. > >> Info: Proxy running in server mode with pid '8932'. > >> Info: Waiting for connection from 'localhost' on port '30126'. > >> Info: Aborting the procedure due to signal '1'. > >> Error: Aborting session with 'Unable to open display > >> > 'nx/nx,options=/ofs/logon/torba/.x2go/C-torba-50-1331918896_stDGNOME_dp24/o > >> ptions:50''. Session: Aborting session at 'Fri Mar 16 18:28:50 2012'. > >> Session: Session aborted at 'Fri Mar 16 18:28:50 2012'. > >> > >> --->> SNAPP <<--- > >> > >> I was so confused, that I added now the line: > >> allowed_users=anybody > >> into /etc/X11/Xwrapper.config ... but nothing > >> > >> I can connect via ssh -X to the server and get for e.g. libreoffice > >> displayed on my local machine. > >> I tried different users ... nope ...same. > >> > >> Hopefully somebody have a hint :) > >> > >> Thanks in advance > >> Torsten > > > > _______________________________________________ > > X2Go-User mailing list > > [email protected] > > https://lists.berlios.de/mailman/listinfo/x2go-user >
_______________________________________________ X2Go-User mailing list [email protected] https://lists.berlios.de/mailman/listinfo/x2go-user
