Hello, I would need your help I followed the wiki “Installation of the X2Go TCE based on Debian“,and I have not got that the thinclient starts the OS
I’ve had two cases: Not installed “Provide firmware for certain hardware”: - ThinClient Start Boot MenuàSelect X2Go TCEàToolbar status loaded full, but nothing appears, only this message: *[ 2.129610] sd 2:0:0:0: [sda] Assuming drive cache: write through* *[ 2.129951] sd 2:0:0:0: [sda] Assuming drive cache: write through* *[ 2.130546] sd 2:0:0:0: [sda] Assuming drive cache: write through* Installed “Provide firmware for certain hardware”: When I add the repository *deb http://ftp.debian.org/debian <http://ftp.debian.org/debian> <distro-codename> main contrib non-free* and install: * apt-get install firmware-linux-nonfree firmware-bnx2 firmware-bnx2x firmware-myricom firmware-netxen firmware-qlogic firmware-ralink firmware-realtek intel-microcode amd64-microcode. * Display this error: *Processing triggers for man-db ...* *locale: Cannot set LC_CTYPE to default locale: No such file or directory* *locale: Cannot set LC_MESSAGES to default locale: No such file or directory* *locale: Cannot set LC_ALL to default locale: No such file or directory* *Setting up firmware-bnx2 (0.36+wheezy.1) ...* *update-initramfs: deferring update (trigger activated)* *Setting up firmware-bnx2x (0.36+wheezy.1) ...* *update-initramfs: deferring update (trigger activated)* *Setting up firmware-linux-nonfree (0.36+wheezy.1) ...* *update-initramfs: deferring update (trigger activated)* *Setting up firmware-myricom (0.36+wheezy.1) ...* *update-initramfs: deferring update (trigger activated)* *Setting up firmware-netxen (0.36+wheezy.1) ...* *update-initramfs: deferring update (trigger activated)* *Setting up firmware-qlogic (0.36+wheezy.1) ...* *update-initramfs: deferring update (trigger activated)* *Setting up firmware-ralink (0.36+wheezy.1) ...* *Setting up firmware-realtek (0.36+wheezy.1) ...* *update-initramfs: deferring update (trigger activated)* *Setting up iucode-tool (0.8.3-1) ...* *Setting up amd64-microcode (1.20120910-2) ...* *Updating microcode on all online processors...* *update-initramfs: deferring update (trigger activated)* *Setting up intel-microcode (1.20140122.1) ...* *Updating microcode on all online processors...* *update-initramfs: deferring update (trigger activated)* *Processing triggers for initramfs-tools ...* *update-initramfs: Generating /boot/initrd.img-3.2.0-4-486* *cryptsetup: WARNING: could not determine root device from /etc/fstab* *libkmod: ERROR ../libkmod/libkmod.c:554 kmod_search_moddep: could not open moddep file '/lib/modules/3.13.0-24-generic/modules.dep.bin'* *intel-microcode: cpuid MSR kernel support missing* *intel-microcode: disabling IUCODE_TOOL_SCANCPUS option* I ignore the error and continue the instructions. When I turn on the thinclient Start Boot MenuàSelect X2Go TCEàToolbar status loaded full, and display this error: *[ 1.714560] sd 2:0:0:0: [sda] Assuming drive cache: write through* *[ 1.715139] sd 2:0:0:0: [sda] Assuming drive cache: write through* *[ 1.716151] sd 2:0:0:0: [sda] Assuming drive cache: write through* *[ 1.762616] platform microcode: firmware: agent aborted loading intel-ucode/06-2d-02 (not dound?)* What am I doing wrong? Can you help me? Thanks
_______________________________________________ x2go-user mailing list [email protected] http://lists.x2go.org/listinfo/x2go-user
