Hi, all I can see is that the proxy on the client side seems to lose connection. The x2goagent looks fine. I am not sure what's going on.
Please retry with a very reduced session: no sound, no printing, no file sharing, just a single app (I suggest xterm). Does this make any difference? Uli On Fri, Feb 10, 2023 at 8:55 PM Joe W <[email protected]> wrote: > > I set up a new Linux system, initially with Centos 7 and installed X2Go from > Epel. > > When I try to connect, then a black window opens that says X2Go on the > background and then closes instantly. > > I tried from a client on the same machine, from a client on different Linux > machines, and from a 4.1.2.0 and 4.1.2.2 clients on WIndows machines. All > exhibit the same behavior. > > I have other Centos 7 machines that I can connect to fine with the same > clients. > > I switched to OS to Rocky Linux 8 for unrelated reasons. I still get the same > behavior. > > I have other Rocky Linux 8 systems that I can connect to without problems. > > THe rest of this post was obtained using Rocky Linux 8. > > X2Goserver is v. 4.1.0.3-17.el8.1 > > I have selected XFCE., disabled Sound and Printing support, as well as SSH > port forwarding on Shared Folders tab. > > I disabled compositing. > > I stopped the firewall and also setenforce 0 to stop selinux form blocking > anything. > > I tried the following procedure and I can start the XFCE environment without > any problems. It does not crash. > ----------------------- > > 1. Instead of starting an x2go session run ssh -X to the server in two > terminals > 2. in the first ssh connection run "nxagent -ac :55" (55 is the one I use > normally, you can use any number here). An empty window should appear > 3. in the second ssh session run "xterm -display :55". The empty window will > now show you an frameless xterm > 4. start the desktop environment by entering "startxfce4" into the xterm. If > that doesn't work try startlxde or just run a window manager, e.g. "openbox &" > > 5. in the desktop environment run your application and try to provoke the > "crash" > 6. post the end of nxagent's output from the first terminal > > ------------------------- > > > I ran the Windows debug client and set the server log mode to debug. I > include the logs at bottom. > > > I read through posts about similar issues in the last seven years but could > not find anything that helped. > > > Any ideas how to debug and fix? > > > ------------------------------------------- > > Client > > ------------------------------------------- > > x2go-INFO-1> "Starting X2Go Client 4.1.2.0..." > x2go-WARNING-1> English language requested, not loading translator. > x2go-WARNING-1> English language requested, not loading translator. > Object::connect: No such slot ONMainWindow::slotCheckAgentProcess() > x2go-DEBUG-../src/onmainwindow.cpp:10349> Getting X.Org Server settings. > x2go-INFO-3> "Started X2Go Client." > x2go-DEBUG-../src/onmainwindow.cpp:563> "$HOME=C:/Users/jsw" > x2go-DEBUG-../src/onmainwindow.cpp:2242> Reading 25 sessions from config file. > x2go-DEBUG-../src/sessionbutton.cpp:342> Creating QPixmap with session icon: > ":/img/icons/128x128/x2gosession.png". > x2go-DEBUG-../src/sessionbutton.cpp:342> Creating QPixmap with session icon: > ":/img/icons/128x128/x2gosession.png". > x2go-DEBUG-../src/sessionbutton.cpp:342> Creating QPixmap with session icon: > ":/img/icons/128x128/x2gosession.png". > x2go-DEBUG-../src/sessionbutton.cpp:342> Creating QPixmap with session icon: > ":/img/icons/128x128/x2gosession.png". > x2go-DEBUG-../src/sessionbutton.cpp:342> Creating QPixmap with session icon: > ":/img/icons/128x128/x2gosession.png". > x2go-DEBUG-../src/sessionbutton.cpp:342> Creating QPixmap with session icon: > ":/img/icons/128x128/x2gosession.png". > x2go-DEBUG-../src/sessionbutton.cpp:342> Creating QPixmap with session icon: > ":/img/icons/128x128/x2gosession.png". > x2go-DEBUG-../src/sessionbutton.cpp:342> Creating QPixmap with session icon: > ":/img/icons/128x128/x2gosession.png". > x2go-DEBUG-../src/sessionbutton.cpp:342> Creating QPixmap with session icon: > ":/img/icons/128x128/x2gosession.png". > x2go-DEBUG-../src/sessionbutton.cpp:342> Creating QPixmap with session icon: > ":/img/icons/128x128/x2gosession.png". > x2go-DEBUG-../src/sessionbutton.cpp:342> Creating QPixmap with session icon: > ":/img/icons/128x128/x2gosession.png". > x2go-DEBUG-../src/sessionbutton.cpp:342> Creating QPixmap with session icon: > ":/img/icons/128x128/x2gosession.png". > x2go-DEBUG-../src/sessionbutton.cpp:342> Creating QPixmap with session icon: > ":/img/icons/128x128/x2gosession.png". > x2go-DEBUG-../src/sessionbutton.cpp:342> Creating QPixmap with session icon: > ":/img/icons/128x128/x2gosession.png". > x2go-DEBUG-../src/sessionbutton.cpp:342> Creating QPixmap with session icon: > ":/img/icons/128x128/x2gosession.png". > x2go-DEBUG-../src/sessionbutton.cpp:342> Creating QPixmap with session icon: > ":/img/icons/128x128/x2gosession.png". > x2go-DEBUG-../src/sessionbutton.cpp:342> Creating QPixmap with session icon: > ":/img/icons/128x128/x2gosession.png". > x2go-DEBUG-../src/sessionbutton.cpp:342> Creating QPixmap with session icon: > ":/img/icons/128x128/x2gosession.png". > x2go-DEBUG-../src/sessionbutton.cpp:342> Creating QPixmap with session icon: > ":/img/icons/128x128/x2gosession.png". > x2go-DEBUG-../src/sessionbutton.cpp:342> Creating QPixmap with session icon: > ":/img/icons/128x128/x2gosession.png". > x2go-DEBUG-../src/sessionbutton.cpp:342> Creating QPixmap with session icon: > ":/img/icons/128x128/x2gosession.png". > x2go-DEBUG-../src/sessionbutton.cpp:342> Creating QPixmap with session icon: > ":/img/icons/128x128/x2gosession.png". > x2go-DEBUG-../src/sessionbutton.cpp:342> Creating QPixmap with session icon: > ":/img/icons/128x128/x2gosession.png". > x2go-DEBUG-../src/sessionbutton.cpp:342> Creating QPixmap with session icon: > ":/img/icons/128x128/x2gosession.png". > x2go-DEBUG-../src/sessionbutton.cpp:342> Creating QPixmap with session icon: > ":/img/icons/128x128/x2gosession.png". > x2go-DEBUG-../src/onmainwindow.cpp:12841> libssh not initialized yet. > Initializing. > x2go-DEBUG-../src/pulsemanager.cpp:369> pulseaudio --version > returned:"pulseaudio 7.1 > " > > x2go-DEBUG-../src/onmainwindow.cpp:10252> Starting helper servers for Windows > ... > x2go-DEBUG-../src/onmainwindow.cpp:10419> "/cygdrive/C/Users/jsw/.x2go/var" > cygwin var path > x2go-DEBUG-../src/onmainwindow.cpp:10503> "C:/Users/jsw/.x2go/etc/sshd_config > created." > x2go-DEBUG-../src/onmainwindow.cpp:9914> Resolved localhost. > x2go-DEBUG-../src/onmainwindow.cpp:9936> Port is free: 7022 > x2go-DEBUG-../src/onmainwindow.cpp:10854> Logging cygwin sshd to: > "C:/Users/jsw/.x2go/sshLogs/p25680.log" > x2go-DEBUG-../src/onmainwindow.cpp:10868> Creating desktop: x2go_jsw > x2go-DEBUG-../src/onmainwindow.cpp:9914> Resolved localhost. > x2go-DEBUG-../src/pulsemanager.cpp:227> pulse started with arguments > ("--exit-idle-time=-1", "-n", "-F", "C:\Users\jsw\.x2go\pulse\config.pa", > "-p", "C:\Program Files (x86)\x2goclient\pulse\lib\pulse-7.1\modules", > "--log-level=debug", "--verbose", > "--log-target=file:C:\Users\jsw\.x2go\pulse\pulse.log") - waiting for it to > finish... > x2go-DEBUG-../src/onmainwindow.cpp:9942> Port already in use: 7022 > x2go-DEBUG-../src/onmainwindow.cpp:9914> Resolved localhost. > x2go-DEBUG-../src/onmainwindow.cpp:9942> Port already in use: 7022 > x2go-DEBUG-../src/onmainwindow.cpp:10965> User mode OpenSSH server started > successfully. > x2go-DEBUG-../src/onmainwindow.cpp:2728> Creating QPixmap with session icon: > '":/img/icons/128x128/x2gosession.png"'. > x2go-INFO-8> "Starting connection to server: 100.71.110.30:22" > x2go-DEBUG-../src/onmainwindow.cpp:2829> Starting new ssh connection to > server:"100.71.110.30":"22" krbLogin: false > x2go-DEBUG-../src/sshmasterconnection.cpp:175> SshMasterConnection, host > "100.71.110.30"; port 22; user "jsw"; useproxy false; proxyserver ""; > proxyport 22 > x2go-DEBUG-../src/sshmasterconnection.cpp:248> Starting SSH connection > without Kerberos authentication. > x2go-DEBUG-../src/sshmasterconnection.cpp:252> SshMasterConnection, instance > SshMasterConnection(0x3cca590) created. > x2go-DEBUG-../src/sshmasterconnection.cpp:520> SshMasterConnection, instance > SshMasterConnection(0x3cca590) entering thread. > x2go-DEBUG-../src/sshmasterconnection.cpp:592> Setting SSH directory to > C:/Users/jsw/ssh > x2go-DEBUG-../src/sshmasterconnection.cpp:840> Session port before config > file parse: 22 > x2go-DEBUG-../src/sshmasterconnection.cpp:850> Session port after config file > parse: 22 > x2go-DEBUG-../src/sshmasterconnection.cpp:915> Session port before config > file parse (part 2): 22 > x2go-DEBUG-../src/sshmasterconnection.cpp:925> Session port after config file > parse (part 2): 22 > x2go-DEBUG-../src/sshmasterconnection.cpp:950> cserverAuth > x2go-DEBUG-../src/sshmasterconnection.cpp:991> state: 1 > > x2go-DEBUG-../src/sshmasterconnection.cpp:711> Setting SSH directory to > C:/Users/jsw/ssh > x2go-DEBUG-../src/sshmasterconnection.cpp:1274> Trying password mechanism if > available. > > x2go-DEBUG-../src/sshmasterconnection.cpp:1278> Password mechanism available. > Continuing. > > x2go-DEBUG-../src/sshmasterconnection.cpp:726> User authentication OK. > x2go-DEBUG-../src/sshmasterconnection.cpp:1789> LOGIN CHECK:"LOGIN OK > " > x2go-DEBUG-../src/sshmasterconnection.cpp:1792> don't have interaction > x2go-DEBUG-../src/sshmasterconnection.cpp:1825> LOOP FINISHED > x2go-DEBUG-../src/sshmasterconnection.cpp:1829> No interaction needed, > continue session > x2go-DEBUG-../src/sshmasterconnection.cpp:735> Login Check - OK > x2go-DEBUG-../src/onmainwindow.cpp:2923> SSH connection established. > x2go-DEBUG-../src/onmainwindow.cpp:3336> Continue normal X2Go session > x2go-DEBUG-../src/sshprocess.cpp:199> Executing remote command via SshProcess > object 0: "x2golistsessions" > x2go-DEBUG-../src/sshprocess.cpp:213> this=SshProcess(0x4096490) Running > masterCon->addChannelConnection(this, ' > "784cbe15-db23-48ff-8495-01eebf012cd8" ', ' "bash -l -c 'echo > "X2GODATABEGIN:784cbe15-db23-48ff-8495-01eebf012cd8"; export > PATH="/usr/local/bin:/usr/bin:/bin";export TERM="dumb"; x2golistsessions; > echo "X2GODATAEND:784cbe15-db23-48ff-8495-01eebf" '); > x2go-DEBUG-../src/sshmasterconnection.cpp:1891> Locking SSH channel > connection MUTEX. > x2go-DEBUG-../src/sshmasterconnection.cpp:1893> Passing new channel > connection object to channelConnections. > x2go-DEBUG-../src/sshmasterconnection.cpp:1895> Unlocking SSH channel > connection MUTEX. > x2go-DEBUG-../src/sshmasterconnection.cpp:2083> Creating new channel. > > x2go-DEBUG-../src/sshmasterconnection.cpp:2100> New channel:0x41d8c28 > > x2go-DEBUG-../src/sshmasterconnection.cpp:2185> Executing remote: "bash -l -c > 'echo "X2GODATABEGIN:784cbe15-db23-48ff-8495-01eebf012cd8"; export > PATH="/usr/local/bin:/usr/bin:/bin";export TERM="dumb"; x2golistsessions; > echo "X2GODATAEND:784cbe15-db23-48ff-8495-01eebf012cd8";'" > > x2go-DEBUG-../src/sshmasterconnection.cpp:2208> New exec channel created. > > x2go-DEBUG-../src/sshmasterconnection.cpp:2312> EOF on channel 0x41d8c28; > SshProcess object: 0 > x2go-DEBUG-../src/sshmasterconnection.cpp:2380> EOF sent. > x2go-DEBUG-../src/sshmasterconnection.cpp:2384> Channel closed. > x2go-DEBUG-../src/sshprocess.cpp:526> SSH finished: raw output (stdout): > "X2GODATABEGIN:784cbe15-db23-48ff-8495-01eebf012cd8 > X2GODATAEND:784cbe15-db23-48ff-8495-01eebf012cd8 > " > x2go-DEBUG-../src/sshprocess.cpp:537> SSH finished: true - "" (0). > x2go-DEBUG-../src/onmainwindow.cpp:3804> "" > x2go-DEBUG-../src/onmainwindow.cpp:4215> Fullscreen: false > x2go-DEBUG-../src/onmainwindow.cpp:9914> Resolved localhost. > x2go-DEBUG-../src/onmainwindow.cpp:9936> Port is free: 6000 > x2go-DEBUG-../src/onmainwindow.cpp:10004> Using internal X.Org Server: true > x2go-DEBUG-../src/onmainwindow.cpp:10027> WxH:"1920"x"1200" > x2go-DEBUG-../src/onmainwindow.cpp:10032> "-multiwindow -notrayicon > -clipboard" > x2go-DEBUG-../src/onmainwindow.cpp:10110> Running "C:/Program Files > (x86)/x2goclient\vcxsrv\vcxsrv.exe" "-multiwindow -notrayicon -clipboard > -nopn -silent-dup-error :0" > x2go-DEBUG-../src/onmainwindow.cpp:10111> Trying to start X.Org Server on > DISPLAY: 0 > x2go-DEBUG-../src/onmainwindow.cpp:4379> Executing remote command: > "X2GODPI=96 X2GO_XINERAMA=no x2gostartagent 1920x1200 adsl 16m-jpeg-9 > unix-kde-depth_32 us auto 1 D XFCE both" > x2go-DEBUG-../src/sshprocess.cpp:199> Executing remote command via SshProcess > object 1: "X2GODPI=96 X2GO_XINERAMA=no x2gostartagent 1920x1200 adsl > 16m-jpeg-9 unix-kde-depth_32 us auto 1 D XFCE both" > x2go-DEBUG-../src/sshprocess.cpp:213> this=SshProcess(0x4096018) Running > masterCon->addChannelConnection(this, ' > "5bf99531-2013-47aa-9f1e-7922cbc6fc79" ', ' "bash -l -c 'echo > "X2GODATABEGIN:5bf99531-2013-47aa-9f1e-7922cbc6fc79"; export > PATH="/usr/local/bin:/usr/bin:/bin";export TERM="dumb"; X2GODPI=96 > X2GO_XINERAMA=no x2gostartagent 1920x1200 adsl 16m-jpeg" '); > x2go-DEBUG-../src/sshmasterconnection.cpp:1891> Locking SSH channel > connection MUTEX. > x2go-DEBUG-../src/sshmasterconnection.cpp:1893> Passing new channel > connection object to channelConnections. > x2go-DEBUG-../src/sshmasterconnection.cpp:1895> Unlocking SSH channel > connection MUTEX. > x2go-DEBUG-../src/sshmasterconnection.cpp:2083> Creating new channel. > > x2go-DEBUG-../src/sshmasterconnection.cpp:2100> New channel:0x41d86a8 > > x2go-DEBUG-../src/sshmasterconnection.cpp:2185> Executing remote: "bash -l -c > 'echo "X2GODATABEGIN:5bf99531-2013-47aa-9f1e-7922cbc6fc79"; export > PATH="/usr/local/bin:/usr/bin:/bin";export TERM="dumb"; X2GODPI=96 > X2GO_XINERAMA=no x2gostartagent 1920x1200 adsl 16m-jpeg-9 unix-kde-depth_32 > us auto 1 D XFCE both; echo > "X2GODATAEND:5bf99531-2013-47aa-9f1e-7922cbc6fc79";'" > > x2go-DEBUG-../src/sshmasterconnection.cpp:2208> New exec channel created. > > x2go-DEBUG-../src/onmainwindow.cpp:9914> Resolved localhost. > x2go-DEBUG-../src/onmainwindow.cpp:9942> Port already in use: 6000 > x2go-DEBUG-../src/onmainwindow.cpp:10172> X.Org Server started on DISPLAY 0. > x2go-DEBUG-../src/onmainwindow.cpp:10394> All helper servers for Windows are > started. > x2go-DEBUG-../src/sshmasterconnection.cpp:2312> EOF on channel 0x41d86a8; > SshProcess object: 1 > x2go-DEBUG-../src/sshmasterconnection.cpp:2380> EOF sent. > x2go-DEBUG-../src/sshmasterconnection.cpp:2384> Channel closed. > x2go-DEBUG-../src/sshprocess.cpp:526> SSH finished: raw output (stdout): > "X2GODATABEGIN:5bf99531-2013-47aa-9f1e-7922cbc6fc79 > 53 > 351372de743afab96734733479216401 > 390553 > jsw-53-1676055047_stDXFCE_dp32 > 45566 > 45567 > 45568 > X2GODATAEND:5bf99531-2013-47aa-9f1e-7922cbc6fc79 > " > x2go-DEBUG-../src/sshprocess.cpp:537> SSH finished: true - "53 > 351372de743afab96734733479216401 > 390553 > jsw-53-1676055047_stDXFCE_dp32 > 45566 > 45567 > 45568 > " (1). > x2go-DEBUG-../src/onmainwindow.cpp:5214> Agent output: "53 > 351372de743afab96734733479216401 > 390553 > jsw-53-1676055047_stDXFCE_dp32 > 45566 > 45567 > 45568 > " > x2go-DEBUG-../src/onmainwindow.cpp:9914> Resolved localhost. > x2go-DEBUG-../src/onmainwindow.cpp:9936> Port is free: 46566 > x2go-DEBUG-../src/sshprocess.cpp:381> Starting tunnel via SshProcess object > 2: "localhost":45566 -> "localhost":46566 > > x2go-DEBUG-../src/onmainwindow.cpp:9914> Resolved localhost. > x2go-DEBUG-../src/onmainwindow.cpp:9942> Port already in use: 6000 > x2go-DEBUG-../src/onmainwindow.cpp:5811> "Starting NX proxy, command: nxproxy > -S nx/nx,options=/cygdrive/C/Users/jsw/X2GO~1/S-F533~1/options:53" > x2go-DEBUG-../src/sshprocess.cpp:157> Direct tunnel: waiting for connections > on "localhost":46566 > x2go-DEBUG-../src/onmainwindow.cpp:6278> Proxy wrote on stderr: " > NXPROXY - Version 3.5.0 > > Copyright (C) 2001, 2010 NoMachine. > See http://www.nomachine.com/ for more information. > > Info: Proxy running in client mode with pid '336'. > Session: Starting session at 'Fri Feb 10 13:50:53 2023'. > Info: Connecting to remote host 'localhost:46566'. > Info: Connection to remote proxy 'localhost:46566' established. > " > x2go-DEBUG-../src/sshprocess.cpp:109> New TCP connection. > x2go-DEBUG-../src/sshprocess.cpp:114> New socket: 2492 > x2go-DEBUG-../src/sshmasterconnection.cpp:2083> Creating new channel. > > x2go-DEBUG-../src/sshmasterconnection.cpp:2100> New channel:0x41d8a18 > > x2go-DEBUG-../src/sshmasterconnection.cpp:2106> Forwarding parameters: from > remote ("localhost":45566) to local ("localhost":1436) > x2go-DEBUG-../src/sshmasterconnection.cpp:2143> Temporary session port after > config file parse: 45566 > x2go-DEBUG-../src/sshmasterconnection.cpp:2147> Temporary session host after > config file parse: localhost > x2go-DEBUG-../src/sshmasterconnection.cpp:2177> New channel forwarded. > > x2go-DEBUG-../src/onmainwindow.cpp:11224> "Searching proxy window: > X2GO-jsw-53-1676055047_stDXFCE_dp32" > x2go-DEBUG-../src/onmainwindow.cpp:12829> "Searching window with title: > X2GO-jsw-53-1676055047_stDXFCE_dp32" > x2go-DEBUG-../src/onmainwindow.cpp:6278> Proxy wrote on stderr: "Info: > Connection with remote proxy completed. > Warning: Unrecognized session type 'unix-kde-depth_32'. Assuming agent > session. > Warning: Failed to read data from the X auth command. > Warning: Generated a fake cookie for X authentication. > Info: Using ADSL link parameters 512/24/1/0. > Info: Using cache parameters 4/4096KB/8192KB/8192KB. > Info: Using pack method '16m-jpeg-9' with session 'unix-kde-depth_32'. > Info: Using ZLIB data compression 1/1/32. > Info: Using ZLIB stream compression 4/4. > Info: No suitable cache file found. > Info: Forwarding X11 connections to display 'localhost:0'. > " > x2go-DEBUG-../src/onmainwindow.cpp:6278> Proxy wrote on stderr: "Session: > Session started at 'Fri Feb 10 13:50:54 2023'. > " > x2go-DEBUG-../src/onmainwindow.cpp:11224> "Searching proxy window: > X2GO-jsw-53-1676055047_stDXFCE_dp32" > x2go-DEBUG-../src/onmainwindow.cpp:12829> "Searching window with title: > X2GO-jsw-53-1676055047_stDXFCE_dp32" > x2go-DEBUG-../src/onmainwindow.cpp:6278> Proxy wrote on stderr: "Info: > Established X server connection. > " > x2go-DEBUG-../src/sshprocess.cpp:199> Executing remote command via SshProcess > object 3: "x2gobasepath" > x2go-DEBUG-../src/sshprocess.cpp:213> this=SshProcess(0x40961b8) Running > masterCon->addChannelConnection(this, ' > "0e5b815b-2db6-4a22-97ed-3313c6833127" ', ' "bash -l -c 'echo > "X2GODATABEGIN:0e5b815b-2db6-4a22-97ed-3313c6833127"; export > PATH="/usr/local/bin:/usr/bin:/bin";export TERM="dumb"; x2gobasepath; echo > "X2GODATAEND:0e5b815b-2db6-4a22-97ed-3313c68331" '); > x2go-DEBUG-../src/sshmasterconnection.cpp:1891> Locking SSH channel > connection MUTEX. > x2go-DEBUG-../src/sshmasterconnection.cpp:1893> Passing new channel > connection object to channelConnections. > x2go-DEBUG-../src/sshmasterconnection.cpp:1895> Unlocking SSH channel > connection MUTEX. > x2go-DEBUG-../src/sshmasterconnection.cpp:2083> Creating new channel. > > x2go-DEBUG-../src/sshmasterconnection.cpp:2100> New channel:0x41d8d30 > > x2go-DEBUG-../src/sshmasterconnection.cpp:2185> Executing remote: "bash -l -c > 'echo "X2GODATABEGIN:0e5b815b-2db6-4a22-97ed-3313c6833127"; export > PATH="/usr/local/bin:/usr/bin:/bin";export TERM="dumb"; x2gobasepath; echo > "X2GODATAEND:0e5b815b-2db6-4a22-97ed-3313c6833127";'" > > x2go-DEBUG-../src/onmainwindow.cpp:11224> "Searching proxy window: > X2GO-jsw-53-1676055047_stDXFCE_dp32" > x2go-DEBUG-../src/onmainwindow.cpp:12829> "Searching window with title: > X2GO-jsw-53-1676055047_stDXFCE_dp32" > x2go-DEBUG-../src/sshmasterconnection.cpp:2208> New exec channel created. > > x2go-DEBUG-../src/sshmasterconnection.cpp:2257> EOF on channel 0x41d8d30; > SshProcess object: 3 > x2go-DEBUG-../src/sshmasterconnection.cpp:2380> EOF sent. > x2go-DEBUG-../src/sshmasterconnection.cpp:2384> Channel closed. > x2go-DEBUG-../src/sshprocess.cpp:526> SSH finished: raw output (stdout): > "X2GODATABEGIN:0e5b815b-2db6-4a22-97ed-3313c6833127 > /usrX2GODATAEND:0e5b815b-2db6-4a22-97ed-3313c6833127 > " > x2go-DEBUG-../src/sshprocess.cpp:537> SSH finished: true - "/usr" (3). > x2go-DEBUG-../src/sshprocess.cpp:199> Executing remote command via SshProcess > object 4: "export > PULSE_CLIENTCONFIG="${HOME}/.x2go/C-jsw-53-1676055047_stDXFCE_dp32/.pulse-client.conf";setsid > /usr/bin/x2goruncommand 53 390553 jsw-53-1676055047_stDXFCE_dp32 45567 > xfce4-session nosnd D 1> /dev/null 2>/dev/null & exit" > x2go-DEBUG-../src/sshprocess.cpp:213> this=SshProcess(0x40962f0) Running > masterCon->addChannelConnection(this, ' > "701f62b1-7c0e-4399-8777-90ea5e49b786" ', ' "bash -l -c 'echo > "X2GODATABEGIN:701f62b1-7c0e-4399-8777-90ea5e49b786"; export TERM="dumb"; > export > PULSE_CLIENTCONFIG="${HOME}/.x2go/C-jsw-53-1676055047_stDXFCE_dp32/.pulse-client.conf";setsid > /usr/bin" '); > x2go-DEBUG-../src/sshmasterconnection.cpp:1891> Locking SSH channel > connection MUTEX. > x2go-DEBUG-../src/sshmasterconnection.cpp:1893> Passing new channel > connection object to channelConnections. > x2go-DEBUG-../src/sshmasterconnection.cpp:1895> Unlocking SSH channel > connection MUTEX. > x2go-DEBUG-../src/sshmasterconnection.cpp:2083> Creating new channel. > > x2go-DEBUG-../src/sshmasterconnection.cpp:2100> New channel:0x41d8d30 > > x2go-DEBUG-../src/sshmasterconnection.cpp:2185> Executing remote: "bash -l -c > 'echo "X2GODATABEGIN:701f62b1-7c0e-4399-8777-90ea5e49b786"; export > TERM="dumb"; export > PULSE_CLIENTCONFIG="${HOME}/.x2go/C-jsw-53-1676055047_stDXFCE_dp32/.pulse-client.conf";setsid > /usr/bin/x2goruncommand 53 390553 jsw-53-1676055047_stDXFCE_dp32 45567 > xfce4-session nosnd D 1> /dev/null 2>/dev/null & exit; echo > "X2GODATAEND:701f62b1-7c0e-4399-8777-90ea5e49b786";'" > > x2go-DEBUG-../src/onmainwindow.cpp:6278> Proxy wrote on stderr: "Info: Using > shared memory parameters 0/0K. > " > x2go-DEBUG-../src/onmainwindow.cpp:11224> "Searching proxy window: > X2GO-jsw-53-1676055047_stDXFCE_dp32" > x2go-DEBUG-../src/onmainwindow.cpp:12829> "Searching window with title: > X2GO-jsw-53-1676055047_stDXFCE_dp32" > x2go-DEBUG-../src/sshmasterconnection.cpp:2208> New exec channel created. > > x2go-DEBUG-../src/sshmasterconnection.cpp:2257> EOF on channel 0x41d8d30; > SshProcess object: 4 > x2go-DEBUG-../src/sshmasterconnection.cpp:2380> EOF sent. > x2go-DEBUG-../src/sshmasterconnection.cpp:2384> Channel closed. > x2go-DEBUG-../src/sshprocess.cpp:526> SSH finished: raw output (stdout): > "X2GODATABEGIN:701f62b1-7c0e-4399-8777-90ea5e49b786 > " > x2go-DEBUG-../src/sshprocess.cpp:537> SSH finished: true - "" (4). > x2go-DEBUG-../src/onmainwindow.cpp:11224> "Searching proxy window: > X2GO-jsw-53-1676055047_stDXFCE_dp32" > x2go-DEBUG-../src/onmainwindow.cpp:12829> "Searching window with title: > X2GO-jsw-53-1676055047_stDXFCE_dp32" > x2go-DEBUG-../src/onmainwindow.cpp:11224> "Searching proxy window: > X2GO-jsw-53-1676055047_stDXFCE_dp32" > x2go-DEBUG-../src/onmainwindow.cpp:12829> "Searching window with title: > X2GO-jsw-53-1676055047_stDXFCE_dp32" > x2go-DEBUG-../src/onmainwindow.cpp:11224> "Searching proxy window: > X2GO-jsw-53-1676055047_stDXFCE_dp32" > x2go-DEBUG-../src/onmainwindow.cpp:12829> "Searching window with title: > X2GO-jsw-53-1676055047_stDXFCE_dp32" > x2go-DEBUG-../src/onmainwindow.cpp:11224> "Searching proxy window: > X2GO-jsw-53-1676055047_stDXFCE_dp32" > x2go-DEBUG-../src/onmainwindow.cpp:12829> "Searching window with title: > X2GO-jsw-53-1676055047_stDXFCE_dp32" > x2go-DEBUG-../src/onmainwindow.cpp:11224> "Searching proxy window: > X2GO-jsw-53-1676055047_stDXFCE_dp32" > x2go-DEBUG-../src/onmainwindow.cpp:12829> "Searching window with title: > X2GO-jsw-53-1676055047_stDXFCE_dp32" > x2go-DEBUG-../src/onmainwindow.cpp:11224> "Searching proxy window: > X2GO-jsw-53-1676055047_stDXFCE_dp32" > x2go-DEBUG-../src/onmainwindow.cpp:12829> "Searching window with title: > X2GO-jsw-53-1676055047_stDXFCE_dp32" > x2go-DEBUG-../src/onmainwindow.cpp:11224> "Searching proxy window: > X2GO-jsw-53-1676055047_stDXFCE_dp32" > x2go-DEBUG-../src/onmainwindow.cpp:12829> "Searching window with title: > X2GO-jsw-53-1676055047_stDXFCE_dp32" > x2go-DEBUG-../src/onmainwindow.cpp:11224> "Searching proxy window: > X2GO-jsw-53-1676055047_stDXFCE_dp32" > x2go-DEBUG-../src/onmainwindow.cpp:12829> "Searching window with title: > X2GO-jsw-53-1676055047_stDXFCE_dp32" > x2go-DEBUG-../src/onmainwindow.cpp:11224> "Searching proxy window: > X2GO-jsw-53-1676055047_stDXFCE_dp32" > x2go-DEBUG-../src/onmainwindow.cpp:12829> "Searching window with title: > X2GO-jsw-53-1676055047_stDXFCE_dp32" > x2go-DEBUG-../src/onmainwindow.cpp:11224> "Searching proxy window: > X2GO-jsw-53-1676055047_stDXFCE_dp32" > x2go-DEBUG-../src/onmainwindow.cpp:12829> "Searching window with title: > X2GO-jsw-53-1676055047_stDXFCE_dp32" > x2go-DEBUG-../src/onmainwindow.cpp:11224> "Searching proxy window: > X2GO-jsw-53-1676055047_stDXFCE_dp32" > x2go-DEBUG-../src/onmainwindow.cpp:12829> "Searching window with title: > X2GO-jsw-53-1676055047_stDXFCE_dp32" > x2go-DEBUG-../src/onmainwindow.cpp:11224> "Searching proxy window: > X2GO-jsw-53-1676055047_stDXFCE_dp32" > x2go-DEBUG-../src/onmainwindow.cpp:12829> "Searching window with title: > X2GO-jsw-53-1676055047_stDXFCE_dp32" > x2go-DEBUG-../src/onmainwindow.cpp:11224> "Searching proxy window: > X2GO-jsw-53-1676055047_stDXFCE_dp32" > x2go-DEBUG-../src/onmainwindow.cpp:12829> "Searching window with title: > X2GO-jsw-53-1676055047_stDXFCE_dp32" > x2go-DEBUG-../src/onmainwindow.cpp:11224> "Searching proxy window: > X2GO-jsw-53-1676055047_stDXFCE_dp32" > x2go-DEBUG-../src/onmainwindow.cpp:12829> "Searching window with title: > X2GO-jsw-53-1676055047_stDXFCE_dp32" > x2go-DEBUG-../src/onmainwindow.cpp:11224> "Searching proxy window: > X2GO-jsw-53-1676055047_stDXFCE_dp32" > x2go-DEBUG-../src/onmainwindow.cpp:12829> "Searching window with title: > X2GO-jsw-53-1676055047_stDXFCE_dp32" > x2go-DEBUG-../src/onmainwindow.cpp:11224> "Searching proxy window: > X2GO-jsw-53-1676055047_stDXFCE_dp32" > x2go-DEBUG-../src/onmainwindow.cpp:12829> "Searching window with title: > X2GO-jsw-53-1676055047_stDXFCE_dp32" > x2go-DEBUG-../src/onmainwindow.cpp:11224> "Searching proxy window: > X2GO-jsw-53-1676055047_stDXFCE_dp32" > x2go-DEBUG-../src/onmainwindow.cpp:12829> "Searching window with title: > X2GO-jsw-53-1676055047_stDXFCE_dp32" > x2go-DEBUG-../src/sshmasterconnection.cpp:2257> EOF on channel 0x41d8a18; > SshProcess object: 2 > x2go-DEBUG-../src/sshmasterconnection.cpp:2380> EOF sent. > x2go-DEBUG-../src/sshmasterconnection.cpp:2384> Channel closed. > x2go-DEBUG-../src/onmainwindow.cpp:11224> "Searching proxy window: > X2GO-jsw-53-1676055047_stDXFCE_dp32" > x2go-DEBUG-../src/onmainwindow.cpp:12829> "Searching window with title: > X2GO-jsw-53-1676055047_stDXFCE_dp32" > x2go-DEBUG-../src/onmainwindow.cpp:6278> Proxy wrote on stderr: "Error: > Failure reading from the peer proxy. > Error: Connection with remote peer broken. > Error: Please check the state of your network and retry. > Session: Terminating session at 'Fri Feb 10 13:51:00 2023'. > Session: Session terminated at 'Fri Feb 10 13:51:00 2023'. > " > QProcess: Destroyed while process is still running. > x2go-DEBUG-../src/onmainwindow.cpp:6135> Deleting Proxy. > x2go-DEBUG-../src/onmainwindow.cpp:6180> Waiting for proxy to exit. > x2go-DEBUG-../src/onmainwindow.cpp:6204> Checking exit status. > x2go-DEBUG-../src/sshprocess.cpp:199> Executing remote command via SshProcess > object 5: "x2gocmdexitmessage jsw-53-1676055047_stDXFCE_dp32" > x2go-DEBUG-../src/sshprocess.cpp:213> this=SshProcess(0x4096560) Running > masterCon->addChannelConnection(this, ' > "9a98b5e2-bbfb-4eab-8fb0-b781376cbf6f" ', ' "bash -l -c 'echo > "X2GODATABEGIN:9a98b5e2-bbfb-4eab-8fb0-b781376cbf6f"; export > PATH="/usr/local/bin:/usr/bin:/bin";export TERM="dumb"; x2gocmdexitmessage > jsw-53-1676055047_stDXFCE_dp32; echo "X2GODATAE" '); > x2go-DEBUG-../src/sshmasterconnection.cpp:1891> Locking SSH channel > connection MUTEX. > x2go-DEBUG-../src/sshmasterconnection.cpp:1893> Passing new channel > connection object to channelConnections. > x2go-DEBUG-../src/sshmasterconnection.cpp:1895> Unlocking SSH channel > connection MUTEX. > x2go-DEBUG-../src/sshmasterconnection.cpp:2083> Creating new channel. > > x2go-DEBUG-../src/onmainwindow.cpp:6261> Finished proxy. > x2go-DEBUG-../src/sshmasterconnection.cpp:2100> New channel:0x41d8a18 > > x2go-DEBUG-../src/sshmasterconnection.cpp:2185> Executing remote: "bash -l -c > 'echo "X2GODATABEGIN:9a98b5e2-bbfb-4eab-8fb0-b781376cbf6f"; export > PATH="/usr/local/bin:/usr/bin:/bin";export TERM="dumb"; x2gocmdexitmessage > jsw-53-1676055047_stDXFCE_dp32; echo > "X2GODATAEND:9a98b5e2-bbfb-4eab-8fb0-b781376cbf6f";'" > > x2go-DEBUG-../src/sshmasterconnection.cpp:2208> New exec channel created. > > x2go-DEBUG-../src/sshmasterconnection.cpp:2312> EOF on channel 0x41d8a18; > SshProcess object: 5 > x2go-DEBUG-../src/sshmasterconnection.cpp:2380> EOF sent. > x2go-DEBUG-../src/sshmasterconnection.cpp:2384> Channel closed. > x2go-DEBUG-../src/sshprocess.cpp:526> SSH finished: raw output (stdout): > "X2GODATABEGIN:9a98b5e2-bbfb-4eab-8fb0-b781376cbf6f > exec xfce4-session > Loading profile from /etc/profile > X2GODATAEND:9a98b5e2-bbfb-4eab-8fb0-b781376cbf6f > " > x2go-DEBUG-../src/sshprocess.cpp:537> SSH finished: true - "exec xfce4-session > Loading profile from /etc/profile > " (5). > x2go-DEBUG-../src/onmainwindow.cpp:9503> "Command message: exec xfce4-session > Loading profile from /etc/profile > " > x2go-DEBUG-../src/sshmasterconnection.cpp:802> SshMasterConnection, instance > SshMasterConnection(0x3cca590) waiting for thread to finish. > x2go-DEBUG-../src/sshmasterconnection.cpp:2002> Disconnecting ... > > x2go-DEBUG-../src/sshmasterconnection.cpp:2013> Deleting channel connections. > > x2go-DEBUG-../src/sshmasterconnection.cpp:2021> Disconnecting session. > > x2go-DEBUG-../src/sshmasterconnection.cpp:2027> Deleting sockets. > > x2go-DEBUG-../src/sshmasterconnection.cpp:2034> All channels closed and > session disconnected. Quitting session loop. > > x2go-DEBUG-../src/sshmasterconnection.cpp:806> SshMasterConnection, instance > SshMasterConnection(0x3cca590) thread finished. > x2go-DEBUG-../src/sshprocess.cpp:52> SshProcess destructor called. > x2go-DEBUG-../src/sshprocess.cpp:52> SshProcess destructor called. > x2go-DEBUG-../src/sshprocess.cpp:52> SshProcess destructor called. > x2go-DEBUG-../src/sshprocess.cpp:52> SshProcess destructor called. > x2go-DEBUG-../src/sshprocess.cpp:52> SshProcess destructor called. > x2go-DEBUG-../src/sshprocess.cpp:52> SshProcess destructor called. > x2go-DEBUG-../src/sshmasterconnection.cpp:813> SshMasterConnection, instance > SshMasterConnection(0x3cca590) finished destructor. > > ---------------------------------------------------------------------------------- > Server > ------------------------------------------------------------------------------------ > running as X2Go Agent > > NXAGENT - Version 3.5.99.26 > > Copyright (c) 2001, 2011 NoMachine (http://www.nomachine.com) > Copyright (c) 2008-2014 Oleksandr Shneyder <[email protected]> > Copyright (c) 2011-2016 Mike Gabriel <[email protected]> > Copyright (c) 2014-2016 Ulrich Sibiller <[email protected]> > Copyright (c) 2014-2016 Mihai Moldovan <[email protected]> > Copyright (c) 2015-2016 Qindel Group (http://www.qindel.com) > See https://github.com/ArcticaProject/nx-libs for more information. > > Info: Agent running with pid '390553'. > Session: Starting session at 'Fri Feb 10 20:50:48 2023'. > Info: Proxy running in client mode with pid '390553'. > Info: Using errors file > '/tmp/.x2go-jsw/C-jsw-53-1676055047_stDXFCE_dp32/session.log'. > Info: Using stats file > '/tmp/.x2go-jsw/C-jsw-53-1676055047_stDXFCE_dp32/C-jsw-53-1676055047_stDXFCE_dp32/stats'. > Loop: WARNING! Unrecognized session type 'unix-kde-depth_32'. Assuming agent > session. > Warning: Unrecognized session type 'unix-kde-depth_32'. Assuming agent > session. > Info: Waiting for connection from 'localhost' on socket 'tcp:*:45566'. > Info: Accepted connection from '127.0.0.1'. > Info: Connection with remote proxy completed. > Info: Using ADSL link parameters 1408/24/1/0. > Info: Using agent parameters 5000/10/50/0/0. > Info: Using cache parameters 4/4096KB/8192KB/8192KB. > Info: Using pack method '16m-jpeg-9' with session 'unix-kde-depth_32'. > Info: Using ZLIB data compression 1/1/32. > Info: Using ZLIB stream compression 4/4. > Info: No suitable cache file found. > Info: Listening to X11 connections on display ':53'. > Info: Established X client connection. > Info: Using shared memory parameters 1/1/0/0K. > Info: Using alpha channel in render extension. > Info: Not using local device configuration changes. > Warning: Cannot read keystroke file '/home/jsw/.x2go/config/keystrokes.cfg'. > Info: using keystrokes file '/etc/x2go/keystrokes.cfg' > Info: ignoring unknown keystroke action 'debug_tree'. > Info: ignoring unknown keystroke action 'regions_on_screen'. > Info: ignoring unknown keystroke action 'test_input'. > Info: ignoring unknown keystroke action 'deactivate_input_devices_grab'. > Currently known keystrokes: > close_session : Ctrl+Alt+t > switch_all_screens : Ctrl+Alt+f > minimize : Ctrl+Alt+m > resize : Ctrl+Alt+r > defer : Ctrl+Alt+e > ignore : Ctrl+Alt+BackSpace > force_synchronization : Ctrl+Alt+j > fullscreen : Ctrl+Shift+Alt+f > viewport_move_left : Ctrl+Shift+Alt+Left > viewport_move_up : Ctrl+Alt+Up > viewport_move_right : Ctrl+Alt+Right > viewport_move_down : Ctrl+Alt+Down > Info: keyboard blocking directory created: > '/home/jsw/.x2go/C-jsw-53-1676055047_stDXFCE_dp32/keyboard' > Info: Keycode conversion is off > Session: Session started at 'Fri Feb 10 20:50:56 2023'. > Info: Screen [0] resized to geometry [1920x1200] fullscreen [0]. > _______________________________________________ > x2go-user mailing list > [email protected] > https://lists.x2go.org/listinfo/x2go-user _______________________________________________ x2go-user mailing list [email protected] https://lists.x2go.org/listinfo/x2go-user
