Its all ok Curt, I am just fiddling. After googling a bit Ive found nothing on the subject of AGW and WINE as a combo. I am just curious really and someone else on this group was interested. I am actually using multiple TNCs. One is USB and one is RS232.
In reality I am better off configuring AX25 up and using that. I am interested to know if anyone has an idea of how to make the USB TNC come up consistantly with the same device designation. Most of the time it is /dev/ttyUSB0 but if it gets unplugged it comes back up as /dev/ttyUSB1 typically. This is a pain with xastir in the interfaces menu. Is there a way it can be locked as a particular device consistantly ? Tony Hunt VK5AH -- Original Message ----- > Date: Thu, 30 Apr 2009 07:17:24 -0700 (PDT) > From: "Curt, WE7U" <[email protected]> > Subject: Re: [Xastir] AGW under WINE > To: Xastir - APRS client software discussion <[email protected]> > Message-ID: <[email protected]> > Content-Type: TEXT/PLAIN; charset=US-ASCII; format=flowed > > On Thu, 30 Apr 2009, Tony Hunt wrote: > > > Basically I could not get this going completely. I used a Mepis 8 install > > (Debian Lenny) with Wine v 1.something . I got the most sense out of it > > running AGW in Windows 98 mode. > > Just curious, are you needing some particular feature that only > AGWPE has, like handling some odd form of TNC that Xastir and/or > AX.25 networking ports won't? Trying to handle lots of TNC's? > > If not, and you're only after the audio soundcard in/out features, > you might try the software that was out before AGWPE and free, > called "soundmodem". You can configure it to appear as a serial > KISS TNC and then hook Xastir's "Serial KISS TNC" interface to it, > or you can configure it as a full-blown AX.25 networking port, in > which case you hook Xastir's "AX25" interface to it. > > If I've suggested this to you before, I apologize. > _______________________________________________ Xastir mailing list [email protected] http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir
