Hello Everyone,
I was searching through the lists, and googling around, but haven't seem to come across a solution for my problem with Xastir 1.9.5 on my Linux box with my Oregon Scientific WMR968. I'm running wx200d but when I try to "View/Own Weather Data" for my WX station I get all zeros and some items with no data values at all. I have added a Interface as follows: My wx200d command line is: /usr/local/sbin/wx200d -s /dev/ttyUSB0 -r -p 9753 Network WX: WX Host: localhost Port: 9753 Activate on Startup and Reconnect on Failure checked Data type: auto Rain Gauge: no correction I have a WMR968 and wx200 displays just fine, ie; [r...@server-1 ~]# wx200 WX200 ff: localhost:9753 9/ 5 3:12:41 1.3 Display: Clock/0/0 Power: AC Battery: ok ---------- Outdoor ----------- ----------- Indoor ----------- Temperature: 17.4 C Hi 17.4 C 9/ 5 3:12 24.1 C Hi 24.1 C 9/ 5 3:06 Lo 17.4 C 9/ 5 3:12 Lo 24.1 C 9/ 5 3:06 Humidity: 39 % Hi 39 % 9/ 5 3:12 54 % Hi 54 % 9/ 5 3:06 Lo 39 % 9/ 5 3:12 Lo 54 % 9/ 5 3:06 Dew Point: 3 C Hi 3 C 9/ 5 3:12 14 C Hi 14 C 9/ 5 3:06 Lo 3 C 9/ 5 3:12 Lo 14 C 9/ 5 3:06 Wind Gust:054NE @ 1.6 m/s Wind Gust Hi:000 N @ 3.9 m/s 9/ 5 3:12 Avg:054NE @ 2.4 m/s Wind Chill: 17 C Lo: 14 C 9/ 5 3:12 Rain Rate: 0 mm/h Yesterday: 0 mm Total: 0 mm since 0/ 0 0:00 Barometer: Steady at 980 hpa 1014 hpa sea; 12-24hr forecast: Sunny My interface status is showing as "UP" for the network WX interface. Any thoughts anyone? Any help would be appreciated! Thanks a bunch! Chris _______________________________________________ Xastir mailing list Xastir@lists.xastir.org http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir