On 09/09/2009, Curt, WE7U <[email protected]> wrote: >> In .xastir/data I have created a file nws-stations.txt which contains >> one line that says G4ILO-7. > > You don't need to do that.
I thought not, but before I added that line I could see that messages were being received by xastir but not sent to RF. After I added it, if I received the messages they were transmitted. > Are you connected to a filtered port on the INET by chance? You > might check your filtering options to see if you've filtered out the > messages/ack's you're seeking. Yes, I am connected to a UK feed, in an addition I am using a filter something like m/15 so I only receive data for stations in my local area. But the filter did not change and sometimes I received the messages and sometimes I didn't. >> Ideally, I would like messages sent to any station that has been heard >> by my gateway to be sent to RF, without needing the calls to be >> entered in a file first. > > That's how igating in Xastir works, assuming that the master switch > in Configure->Defaults is set up to allow it, and the switch on the > particular interfaces of interest are also set appropriately. > > Xastir will send messages/ack's/nak's to RF if the station has been > heard on local RF in the last hour. If it hasn't, it won't send > them to RF. I believe all igate software works in a similar manner. That's what I thought. However it doesn't appear to work like that. And I had exactly the same trouble (some messages not getting to me at all, messages for G4ILO-7 not being sent to RF unless I specifically added that call to a list) with UI-View32. Is there some other factor that could be causing this, such as the hop-count expiring? Perhaps I should try connecting to a different server than ahubswe.net. -- Julian, G4ILO G4ILO's Shack: www.g4ilo.com _______________________________________________ Xastir mailing list [email protected] http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir
