On Sat, Oct 24, 2009 at 09:32, Neville A. Cross <[email protected]> wrote: > On Sat, Oct 24, 2009 at 12:29 AM, Eric Christensen > <[email protected]> wrote: >> So a while back I wrote that I was having problems with my KAM+ when >> using Xastir. Tonight I started messing with it again to see if I >> could get it working but I'm running into the same problems as before. >> >> When I hook up my KPC-9612+ it transmits fine. When I then hook up my >> KAM+, using the same configuration, and hit "send position" I get the >> following: >> >> W4OTN>APX194,WIDE2-2:=\;ci:;.Vo- WLNK-1 XASTIR-Linux >> $ >> EH? >> >> I can down the interface and bring up a terminal window and the KAM+ >> is in conv mode and if I hit "enter" the TNC will transmit. >> >> Anyone have any ideas? I'd really like to get this unit up on HF. >> >> 73, >> Eric W4OTN > > The KAM+ is in command mode and it not recognizing the text as a valid > command. > Right now your KAM is terminal mode. Xastir should be configured as > TNC in serial port. > > What kind of setting are you using for conecting Xastir to this TNC ?
Yeah, it's putting the device in Terminal mode at the beginning of the tnc-startup.kam file. I've got it setup as a Serial TNC. It receives fine it just won't transmit. Again, works fine on my 9612+ but not on my KAM+. --Eric W4OTN _______________________________________________ Xastir mailing list [email protected] http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir
