Warning: This message has had one or more attachments removed Warning: (not named). Warning: Please read the "Hollyead-NET-Attachment-Warning.txt" attachment(s) for more information.
I am using a TNC-X and the flowcontrol can be an issue. stty needed to be used to disable flow control. Might this be it? Joe, KI7WV ________________________________ From: [email protected] on behalf of Jacob Tennant Sent: Thu 3/11/2010 8:12 PM To: [email protected] Subject: [Xastir] USB to SERIAL adapter problem I almost got my soon to be igate system setup but have run into a small snag. I am using a USB to serial adapter and I can't seem to get Xastir to talk to the TNC? I tried it out first in minicom and In minicom I can talk to the TNC perfectly. But when I tried it in Xastir it will not start the interface. I am using the port setting of /dev/ttyUSB0 in both programs. Any ideas? Running Fedora12 Jacob Tennant - K8JWT _______________________________________________ Xastir mailing list [email protected] http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir
This is a message from the MailScanner E-Mail Virus Protection Service ---------------------------------------------------------------------- The original e-mail attachment "winmail.dat" was believed to be infected by a virus and has been replaced by this warning message. If you wish to receive a copy of the *infected* attachment, please e-mail helpdesk and include the whole of this message in your request. Alternatively, you can call them, with the contents of this message to hand when you call. At Thu Mar 11 22:45:31 2010 the virus scanner said: Could not parse Outlook Rich Text attachment Note to Help Desk: Look on the Hollyead-NET () MailScanner in /var/spool/MailScanner/quarantine/20100311 (message B47C56F314.80B21). -- Postmaster Hollymead NET www.hollymead.net For all your IT requirements visit: http://www.transtec.co.uk
_______________________________________________ Xastir mailing list [email protected] http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir
