On 01/09/2011 02:31 AM, David Flood wrote: > If and when anyone with a D72 either takes the time to work through new > script settings or donates/loans it to one of the Developers then there will > be a new script. I'm sorry but that's how it works.....I know my name is on > some of the mods to the script but I'm quite happy with my D700 and D7ag so > I can't justify buying yet another radio...especially in light of my reduced > Public Service involvement due to various issues. > > Dave > KD7MYC
I have been browsing the tnc-startup.thd7 file and as long as the TH-D72 manually is set to TNC mode this should work ok. There should not be any "new" TNC commands comparing the TH-D7 and TH-D72 except for the GPS commands. But if you want the radio to automatic enter TNC mode you have to adapt the TM-D710 script. The difference between the TH-D7 and TH-D72 is more or less only the "TN x,y" command that turns on/off the TNC. So to get the .thd7 file to automatic start the TNC on the TH-D72 just add the command: TN 2,0 (start TNC on band A) after the TC 1 command To get it to change frequency before the TN 2,0 enter: FO 0xxxxxxxxxx0000000101001000000000 Where x is a 10digit frequency in Hz I can verify this later and upload some working TNC start/stop scripts. -- Kai Günter Brandt LA3QMA _______________________________________________ Xastir mailing list [email protected] http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir
