On 25 Jan 2011, at 13:55, Steve Rogers wrote: > > I did open that interface as 0 first. Do I need to setup ax25 before open any > interfaces in xastir. Steve That depends
If you add a kiss interface directly in xastir, you don't If you wish to share the AX.25 kiss device between multiple applications, then you will need to have axports properly populated, and kissattach running for each device Regards John EI7IG > >> Date: Tue, 25 Jan 2011 10:19:49 +0100 >> From: [email protected] >> To: [email protected] >> Subject: Re: [Xastir] (no subject) >> >> have you connected ttyS0 before running ax25d ???? >> >> 2011/1/25 Steve Rogers <[email protected]> >> >>> >>> Hello, I am having trouble with the AX25 kernel, I am running Ubuntu 10.4 >>> on xastir-2.0.1 (CVS). This is the errors: >>> axconfig: port server not active >>> ERROR: problem with axports file >>> >>> ~$ ./ax25.up >>> kissattach: device /dev/ttyUSB0 already in use >>> I changed the name of the "aprs" to server. I am not sure how to "run" >>> /sbin/update-modules. I believe I need to load this module to get kernel to >>> work. (I am guessing here). >>> Appreciate a hand, Xastir 2.0.1 works great by the way! >>> Steve/kd5mkv >>> >>> _______________________________________________ >>> Xastir mailing list >>> [email protected] >>> http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir >>> >> >> >> >> -- >> >> *73s de Leo, IZ5FSA >> * >> _______________________________________________ >> Xastir mailing list >> [email protected] >> http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir > > _______________________________________________ > Xastir mailing list > [email protected] > http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir _______________________________________________ Xastir mailing list [email protected] http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir
