Hi, I added some commands that Kai, LA3QMA, came up with for the D7A(g) to get the connected GPS data to pass through to Xastir in his D72a initialization file and it sort of works. I get a sailboat though for the station icon and I can't change it for the life of me. The icon stays as the usual in the setup configuration in Xastir. (A rocket in this case.) The complete file is as follows with the part of interest in the last lines. Take a look and try it with a D72 and an attached GPS. Please critique and make improvements as seen fit. It may not be perfect but the D72A will pass-through coordinates from an attached external GPS. I can get the icon situation straightened out when I use a D7A(g) but a sailboat with the 72? :-)
Kurt KC9LDH ---------------------------------------------------------- # $Id: tnc-startup.thd72,v 1.00 2011/02/11 02:12:23 LA3QMA Exp $ # # Copyright (C) 2004-2010 The Xastir Group # # TNC Init file for KENWOOD TH-D72. Also reported to work with the # # #Don't send CONTROL-C before this line ##META <no-ctrl-c> BC 0 ##Pause for one second META <delay> META <delay> VM 0,1 MR 0,001 #FO 0,0144800000,0,0,0,0,0,0,0,08,08,000,0,05000000,0 ##Pause for one second META <delay> META <delay> TC 1 ##Pause for one second META <delay> META <delay> #Put the TNC in packet mode since this is where we want to end up # Change the 1 to 0 to go to normal radio mode ##META <no-ctrl-c> TN 2,0 # Pause for two seconds ##META <delay> ##META <delay> ##META <delay> ##META <delay> # Enable 4800 baud GPS # Change to 2 for 9600 baud GPS # Disable both the META line and the GU line for no change ##META <no-ctrl-c> #GU 1 # Pause for two seconds ##META <delay> ##META <delay> ##META <delay> ##META <delay> #Turn off Terminal Control ##META <no-ctrl-c> #TC 0 # Pause for two seconds just in case ##META <delay> ##META <delay> ##META <delay> ##META <delay> HID off #CWID off #AWlen 8 BBSMsgs ON B E 0 LOC E 0 Echo off FLow off AUTOLF off MCOM off MON ON MRPt on PACLen 128 PASSALL off HBAUD 1200 TXDELAY 25 HEADERLN off # Delete following lines if without GPS #GBAUD 4800 #GPSTEXT $GPRMC #LTMH OFF #LTM 10 # GPSTEXT $GPRMC LTMN ON LTM 10 LPATH GPS # _______________________________________________ Xastir mailing list [email protected] http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir
