On Sun, 20 Mar 2011, Dale Seaburg wrote:
I have my xastir (latest cvs version) running. I have a internet server setup for texas.aprs2.net port 14580. I have a filter (r/31.43/-99.08/150). I see traffic, but I don't seem to be gating any local traffic back to the APRS-IS. I do not have the Transmit checked for now. I assume that means gating IS traffice back onto RF, correct?
There are specific radioboxes on each RF interface for: *) Disable all IGate traffic *) Allow RF to Inet traffic ONLY *) Allow RF->Inet and Inet->RF traffic So you can enable/disable for each interface that way. Then there's a global selection which takes precedence over the individual interface toggles. It's at Configure->Defaults. Make sure you've also put in your callsign and your callpass. Sounds like you did already if you have a range filter and you're receiving packets from the 'net. -- Curt, WE7U. http://www.eskimo.com/~archer APRS Client Capabilities: http://www.eskimo.com/~archer/aprs_capabilities.html _______________________________________________ Xastir mailing list [email protected] http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir
