2012/7/27 Tom Russo <[email protected]> > Were that the case, Xastir wouldn't have been sending UNPROTO and > MYCALL commands, which are only sent when Xastir's expecting a TNC in > regular > serial command mode. > > I second that, and everything works fine when I type the same commands from a terminal emulator.
> I'm really curious what that non-printable character is. Stefano: What > ascii code shows up in that little box you describe? > > It's a Ctrl-C (0x03 / character used to exit from CONV mode). What I'm pasting comes from the "-v 2" debug output into the console window, here I'm replacing the 0x03 with [0x03] so that you see where it appears: CMD:[0x03]ECHO OFF CMD:[0x03]ECHO OFF CMD:[0x03]FLOW OFF CMD:[0x03]FLOW OFF CMD:[0x03]HID OFF/OFF CMD:[0x03]HID OFF/OFF CMD:[0x03]MSTAMP OFF CMD:[0x03]MSTAMP OFF CMD:[0x03]PASSALL OFF CMD:[0x03]PASSALL OFF CMD:[0x03]PID OFF CMD:[0x03]PID OFF MYCALL IZ0MJE CMD:[0x03]UNPROTO APX200 VIA WIDE2-2 CMD:[0x03]k CMD:=4151.13N/01225.45ExXASTIR-Linux >X:1<=4151.13N/01225.45ExXASTIR-Linux MYCALL IZ0MJE CMD:[0x03]UNPROTO APX200 VIA WIDE2-2 CMD:[0x03]k CMD:=4151.13N/01225.45ExXASTIR-Linux >X:1<=4151.13N/01225.45ExXASTIR-Linux So the oddballs, without Ctrl-C, are the "MYCALL" line and the seemingly not going in CONVerse (k) mode of the TNC. Or possibly going and exiting immediately after. I'm not sure why the statup script lines appear twice. I wish I could have both sides of the pc<>tnc conversation dumped into the console, as that would make things easier to read. What is LANG set to on your machine? LANG=it_IT.UTF-8 > Have you tried running xastir from > a command line like this > env LANG=C xastir & > > No change whatsoever. Oh, by the way here is somebody else with exactly the same issue: http://tech-tut.com/?p=1624 Thanks everybody for the interest in my problem. 73 Stefano IZ0MJE _______________________________________________ Xastir mailing list [email protected] http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir
