Dave, Don't flame yourself to much, each of us could just as easily make the same mistake. Now it is time to add that tidbit to the things to check for in the FAQ. Write up the details and specifics and post those notes here so others can find your solution with a search. Thank You 73 Dave KB3EFS FN24BI81GP
On 10/12/2012 02:52 AM, David wrote: > Hi...red face dept here > found the problem.... > object was showing up in the Pacific...all at sea > > in the Dstar program a space before the -19.14530 > showed up as North not South as it should have been > > as i said it was something simple > > thanks > > 73 David VK4BDJ > > > > On 12/10/12 14:45, David wrote: >> Hi All.... >> a couple of days ago i did a ./update-xastir >> all went well or so i thought >> as i run a Dstar program on another comp which outputs >> DPRS to APRS and would put a Dstar object on my APRS position >> up till i did the update it was showing very well >> i know the TNC is showing a line in the Display Packet Data screen >> but it is not showing up on my map >> >> i have checked Google Maps APRS and it comes up there >> >> what have i done wrong? what config menu have i missed? >> >> bet its something simple >> >> 73 David VK4BDJ >> > > _______________________________________________ > Xastir mailing list > [email protected] > http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir > > -- David A Aitcheson [email protected] Go Green! Print this email only when necessary. _______________________________________________ Xastir mailing list [email protected] http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir
