Hi, I can't get to update my xastir 2.0.3 from CVS to correct the script-files. I tried all the commands given hier on the xastir-mailing list. No luck. I got the shape files running (get-NWSdata), but nothing else. Thanks
Udo Wolfram Franko VISINTINI KF4KUL Lealman Special Fire District CERT Member 570-07 Community Emergency Response Team-Basic Training Course-317 SKYWARN Advanced Certified through the National Weather Service in Ruskin PIN-296A CPR and AED Certified by the American Safety & Health Institute ARRL Member # 6508504 SPAR Member (Society for the Preservation of Amateur Radio) FEMA Independent Study Courses IS-07 A Citizen’s Guide to Disaster Assistance IS-100 Introduction to the Incident Command System IS-242 Effective Communications IS-700 National Incident Management System (NIMS) IS-802 ESF #2 Communications Emergency Support Function　 This message (including any attachments) is confidential and may be privileged. If you have received it by mistake please notify the sender by return e-mail and delete this message from your system. Any unauthorized use or dissemination of this message in whole or in part is strictly prohibited. I, Udo Visintini shall not be liable for the improper or incomplete transmission of the information contained in this communication nor for any delay in its receipt or damage to your system. I, Udo Visintini don't guarantee that the integrity of this communication has been maintained or that this communication is free of viruses, interceptions or interference. > From: [email protected] > Subject: Xastir Digest, Vol 85, Issue 2 > To: [email protected] > Date: Mon, 3 Dec 2012 12:00:02 -0500 > > Send Xastir mailing list submissions to > [email protected] > > To subscribe or unsubscribe via the World Wide Web, visit > http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir > or, via email, send a message with subject or body 'help' to > [email protected] > > You can reach the person managing the list at > [email protected] > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of Xastir digest..." > > > Today's Topics: > > 1. Re: Remote headless server options for use with Xastir? > (Lee Bengston) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Mon, 3 Dec 2012 07:57:29 -0500 > From: Lee Bengston <[email protected]> > To: Xastir - APRS client software discussion <[email protected]> > Subject: Re: [Xastir] Remote headless server options for use with > Xastir? > Message-ID: > <CAPF_JSLo76bm9nZYkN9iz=wgv89ylercsdqbgnqym25pt5z...@mail.gmail.com> > Content-Type: text/plain; charset=ISO-8859-1 > > On Mon, Nov 19, 2012 at 9:58 PM, Lee Bengston <[email protected]> wrote: > > I just recently set up a Raspberry Pi running DIXPRS with an AX25 > > interface to a TNC. I haven't tried adding ldsped yet, but that's the > > next step. As Tom said, ldsped will have to be built from source on > > the Rasperry Pi or Beaglebone. All I have is the binary of ldsped > > that the author sent me about 15 months ago, so I need to request the > > source code. > > As it turned out, there was an arm binary for ldsped vailable at the > author's site, so I downloaded and installed it on the Raspberry Pi, > and it worked fine. Now pretty much any APRS client on the home > network that supports AGWPE interfaces can access the TNC that is > connected to the Rasperry Pi. DIXPRS is running on the Raspberry Pi > 7x24 as a headless IGate while the other apps are used on demand. > > Regards, > > Lee - K5DAT > > > ------------------------------ > > _______________________________________________ > Xastir mailing list > [email protected] > http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir > > > End of Xastir Digest, Vol 85, Issue 2 > ************************************* _______________________________________________ Xastir mailing list [email protected] http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir
