On Tue, Mar 19, 2013 at 08:10:35AM +1100, we recorded a bogon-computron collision of the <[email protected]> flavor, containing: > On Mon, 18 Mar 2013 15:38:23 -0500 > Chris-N9JCA <[email protected]> wrote: > > > Going back to my original post > > I seem to have "fixed" the NO decode problem > > GPS USED was enabled, after turning it OFF/NOT USED > > I am now RX/TXing fine > > I now want to set up my D700 as a Digipeater on 144.990, > > as we have a marathon slated for April 6th and want to use a different > > frequency, other than 144.390. I filled out the UIDIGI as > > WIDE1-1,WIDE2-1 and the DIGIPEATER as ON Should I ADD UIDIGI=ON > > DIGIPEATER=ON to the Configuration file in Xastir for startup.d700 > > On another note,if someone can take a look at my configuration file I > > posted earlier and tell me if I need to make any changes, it would be > > greatly appreciated > > Xastir doesn't digipeat.
The TNC in the D700 can digipeat on its own without Xastir's help, and that's what Chris is trying to use. I do believe that turning "UIDIGI=ON" is incorrect (that would tell the D700 to digipeat the "ON" path, not turn on digipeating). Otherwise the settings Chris gives look right for enabling this digipeating by the TNC while Xastir takes care of plotting and managing the other APRS featurs. I haven't commented on any of Chris's emails because he is using his D700 in a way I never have, and my own D700 startup file is exactly the one in the Xastir repository. But by my read, the UIDIGI=WIDE1-1,WIDE2-1 and DIGIPEATER=ON settings should accomplish the stated goal. Chris: Remember to clear the UIDIGI setting after your event is done and you return your D700 to normal 144.390 operation --- it is bad practice to leave a D700 as a mobile digi on the standard generic callsigns. Setting UITRACE to "TEMP" and leaving DIGIPEATER set to ON is, however, a recommended practice enabling your D700 to serve as a "TEMP" digi for ad-hoc operation when the local infrastructure is down or during field day. See http://www.aprs.org/D7xx/d700-faq.txt for recommended settings for normal day-to-day operations. -- Tom Russo KM5VY SAR502 DM64ux http://www.swcp.com/~russo/ Tijeras, NM QRPL#1592 K2#398 SOC#236 http://kevan.org/brain.cgi?DDTNM echo "prpv_a'rfg_cnf_har_cvcr" | sed -e 's/_/ /g' | tr [a-m][n-z] [n-z][a-m] _______________________________________________ Xastir mailing list [email protected] http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir
