Hello Dan,
I never had much luck in switching my D710 in and out of KISS mode let
alone switch the various modes from the command mode due to timing
issues, etc. What I did find 100% reliable is the following program
written by Guido Trentalancia IZ6RDB. It was posted to some email list
on the web so I made a copy of it and posted it here:
http://www.trinityos.com/HAM/CentosDigitalModes/usr/src/misc/D710/tmd710_tncsetup.c
To compile it on your Rpi, just use:
gcc -o tmd710_tncsetup tmd710_tncsetup.c
After that, just run the program with no options and it will display the
available options.
--David
KI6ZHD
Hi Guys
Just a bit of background, Running Xastir on a RaspberryPi, the main purpose of
this unit is for Raynet (uk emergency comms)
I have been using it with my D72 handheld with some success. What I did notice
is that its fine with packet12 mode. I have a script on the Pi that runs Xastir
on startup and that then fire the command to launch D72 into PKT Mode.
I need this to be able to digi packets. Easiest way of doing this is to use the
radio in APRS12 mode and set the UI-Digi on the radio, Effectively meaning that
Xastir acts as a RF to IGate. However to use APRS12 mode the radio has to
already be in that mode for Xastir to see the data from the handheld. Having
used other windows flavor based software it can force the radio into the
particular mode. My Scripts for the D72 are below
This issue also applies to the Kenwood D710 I am testing
Wonder if anyone has any tips.
Dan
M0MST
K710 APRS Start
#Don't send CONTROL-C before this line
##META <no-ctrl-c>
#TC 1
##Pause for one second
##META <delay>
##META <delay>
#Put the TNC in packet mode since this is where we want to end up
# Change the 1 to 0 to go to normal radio mode
##META <no-ctrl-c>
TN 2,0
# Pause for two seconds
##META <delay>
##META <delay>
##META <delay>
##META <delay>
HID off
AWlen 8
BBSMsgs ON
B E 0
LOC E 0
Echo off
FLow off
AUTOLF off
MCOM off
MON ON
MRPt on
PACLen 128
PASSALL off
HBAUD 1200
TXDELAY 25
HEADERLN off
D72 - APRS Start.
# from http://wiki.complete.org/THD72PCAPRS
# modified from http://lists.xastir.org/pipermail/xastir/2011-July/020111.html
#Don't send CONTROL-C before this line
##META <no-ctrl-c>
#TC 1
##Pause for one second
##META <delay>
##META <delay>
#Put the TNC in packet mode since this is where we want to end up
# Change the 1 to 0 to go to normal radio mode
##META <no-ctrl-c>
TN 2,0
# Pause for two seconds
##META <delay>
##META <delay>
##META <delay>
##META <delay>
HID off
AWlen 8
BBSMsgs ON
B E 0
LOC E 0
Echo off
FLow off
AUTOLF off
MCOM off
MON ON
MRPt on
PACLen 128
PASSALL off
HBAUD 1200
TXDELAY 25
HEADERLN off
_____________
TNC Stop
STOP FILE
# Undo any settings make in tnc-startup.sys
# Edit this file for your tnc!
UNPROTO CQ
AUTOLF ON
ECHO ON
#Don't send CONTROL-C before this line
##META <no-ctrl-c>
TC 1
##Pause for one second
##META <delay>
##META <delay>
##META <delay>
#Put the TNC in internal mode since this is where we want to end up
# Change the 1 to 0 to go to normal radio mode
##META <no-ctrl-c>
TN 0,0
# Pause for two seconds
##META <delay>
##META <delay>
##META <delay>
##META <delay>
#Turn off Terminal Control
##META <no-ctrl-c>
TC 0
# Pause for two seconds just in case
##META <delay>
##META <delay>
##META <delay>
##META <delay>
#
_______________________________________________
Xastir mailing list
[email protected]
http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir
_______________________________________________
Xastir mailing list
[email protected]
http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir
