Max,

It's been a while since I compiled xastir on the RPi and I can't remember what I needed to do. I moved away from the Pi to a PC but still running Debian Wheezy. With Debian installations I've struck dependency problems between motiff/lesstif and imagemagick/graphicsmagick.

I found this to jog my memory;

This is what I had to say about dependencies ..

On Aug 31, 2012, at 6:31 PM, Ray Wells <[email protected]> wrote:

> All,
>
> I'm making progress towards a working RPi for an igate but have struck a
> snag compiling xastir.
>
> I'm using the latest Debian Wheezy kernel - 2012-08-16-wheezy-raspbian.img
> - and have compiled libax25, ax25apps & ax25tools. The stumbling block with
> xastir is dependency conflicts between libgeotiff2-dev and both imagemagick
> and graphicsmagick. I can have one or the other but not both. The conflict
> is well documented but, thus far, I have not found a solution.


My solution on the Pi and subsequent PC based Debian installations of xastir has been to compile libgeotiff from sources,
following the method used in an old version of Ubuntu - 10.04 - 
http://www.xastir.org/wiki/HowTo:Ubuntu_10.04

These are the steps from that document. I can't remember if I looked for a 
later version on the osgeo site.


       Install libgeotiff

 * Download the libgeotiff source

As of this writing, the latest libgeotiff source can be downloaded like this:

    cd ~/src
    wgethttp://download.osgeo.org/geotiff/libgeotiff/libgeotiff-1.2.5.tar.gz

 * Unpack libgeotiff

    tar zxvf libgeotiff-1.2.5.tar.gz
    cd libgeotiff-1.2.5/

 * Build and install libgeotiff

    ./configure --with-ld-shared="gcc -shared"
    make
    sudo make install
    sudo ldconfig


There might be other ways but this worked for me.

Ray vk2tv

BTW, David has a nice collection of AR stuff on his site.


On 22/11/13 04:20, Max Harper wrote:
Thanks Ray, gettting a little farther. Here is the next error
checking for Motif headers... configure: error: **** NO MOTIF HEADERS FOUND **** install Motif development headers or use --with-motif-includes to specify location of Xm/Xm.h

Thanks, Max KG4PID
_______________________________________________
Xastir mailing list
[email protected]
http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir


_______________________________________________
Xastir mailing list
[email protected]
http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir

Reply via email to