Lee, I put a Pi with a TNC-X Pi using aprx on 144.34 and a KPC3 in KISS on a Prolific USB based adapter on 144.39 at the repeater site in Denton Tx with 21 days of service so far with out trouble. This was a club funded project so I did not try Xastir on it but so far it has been a very stable and reliable igate/digi. I compiled from source. It is on the release SVN as of February 6th. W5NGU-3 is the call on 144.39.
73 Guy KC5GOI On Fri, Feb 21, 2014 at 7:50 PM, Lee Bengston <[email protected]> wrote: > Ray and all, > > Here is an update on my Raspberry Pi operation. I have completed 26 days > of continuous IGate operation using APRX with no issues. > > Previously with the same hardware, OS, and ax25 networking configuration, I > would get 10-14 days of uptime with Dixprs before the entire OS would > freeze. Next I tried Xastir, and after 19 days the ax25 interface stopped > functioning. > > APRX is the smallest of all of the programs, so perhaps it just stresses > the Pi the least. I have the version of the Pi with only 256MB of RAM. I > took the easy path and installed the binary that John Gorkos provides - it > is version 2.08. > > Regards, > Lee - K5DAT > > > - sent from my mobile phone > > On Jan 30, 2014 5:08 PM, "Ray Wells" <[email protected]> wrote: >> >> Lee, >> >> A quick update on my RPi's. >> >> The adsb unit is about to tick up 22 days and for the aprs gateway unit > with dixprs it's 18 days. >> >> I'm finally starting to have confidence in the Pi for my 24/7 radio > applications. >> >> Ray vk2tv > _______________________________________________ > Xastir mailing list > [email protected] > http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir -- 73 Guy Story KC5GOI [email protected] _______________________________________________ Xastir mailing list [email protected] http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir
