Hi, Jason, KG4WSV, was helping me with this problem. We've been able to come up with two solutions. #1 is to have the tracking receiver that is receiving the remote data in NMEA form, attached as the serial GPS to Xastir. The remote data gets displayed and can be transmitted by selecting "Posit Transmit Interval" under "Configure". The only handicap here is the minimum is once every 6 seconds (.1minute). I wonder if that could be changed somewhere to
once every 4 to 5 seconds? When I track, I (and others) don't use 144.390 to track rockets or R/C devices. We just want to find our projects. Many use 70cm for this and not the National Frequency. With Jason's gps2aprs.pl script, method #2, one goes to the "Interface" drop down, selects the "Enable Sever Ports" button, waits a few seconds, then fires up the gps2aprs.pl script in another terminal. This takes the raw NMEA data and injects it into Xastir as an APRS packet. Once the script is running, one sees the raw NMEA data coming in on the terminal which can then be minimizied. The only problem with this method is Xastir doesn't recognize this "station" as something to digipeat. The tracking system is on 33cm and cross band repeating it to another ham band allows one to track using handheld rigs like the D7, 72, VX-8 series, FT1DR and attach a mapping GPS to those rigs as possible. Jason's script gps2aprs.pl is quite useful and if anyone wants to see it, request the link from him. He sent the link to me by PM so I don't know if he'd mind if I post it. Kurt KC9LDH ________________________________ From: Lee Bengston <[email protected]> To: Xastir - APRS client software discussion <[email protected]> Cc: Xastir - APRS client software discussion <[email protected]> Sent: Friday, March 21, 2014 1:49 PM Subject: Re: [Xastir] IS to RF igating Fyi, There is a relatively obscure igate application called aprsg that will gate everything received from an IS server port to RF - everything, that is, that matches the filter that is configured. It is a small open source app that runs fine in Linux. Lee - K5DAT - sent from my mobile phone On Mar 20, 2014 10:48 AM, "Jason KG4WSV" <[email protected]> wrote: > On Thu, Mar 20, 2014 at 8:41 AM, Tom Russo <[email protected]> wrote: > > On Thu, Mar 20, 2014 at 07:52:16AM -0500, we recorded a bogon-computron > collision of the <[email protected]> flavor, containing: > >> I'm trying to remember how to gate IS traffic to RF, and I thought > >> there was some file to configure (maybe with nws in the name??) to > >> allow specific stations to gate from IS to RF. > > > > .xastir/data/nws-stations.txt > > > > It's meant for letting you gate NWS weather alerts, and it is a list of > > prefixes to pass to RF. > > > >> If I want to gate all data from a network connection out an RF > >> interface, what do I need to do? Just click all the buttons I can see > >> in file->configure and interface->configure ? > > > > I do not believe Xastir supports this use case. It can only gate > messages > > and specified stations in nws-stations.txt. > > That's what I thought. > > Thanks for filling in the gaps. I remembered the filename has nws in > it, but that was all... > > I've got a rocket tracking application that works like a remote GPS. > I've got a perl script that reads GPS data, makes APRS packets out of > it, and feeds that to xastir over the server port. I'm trying to get > this data on the air so I can use my D7 as a handheld ground station. > > -Jason > kg4wsv _______________________________________________ Xastir mailing list [email protected] http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir
