Tom, Thanks for the step by step! I was able to get everything configured, compiled and installed. However, I don't see much of a difference other than the tray item at the bottom have been moved to the left and stack in two rows. I tried opening the Interface Menu and then looking at the config of my USB TNC port and I still have the problem with the buttons being off of the bottom of the screen. Should I have seen a difference with this or am I asking for too much change over? Jason Rausch - Amateur Radio Callsign: KE4NYV RPC Electronics, LLC www.rpc-electronics.com
________________________________ From: Tom Russo <ru...@bogodyn.org> To: Jason Rausch <ja...@ke4nyv.com>; Xastir - APRS client software discussion <xastir@lists.xastir.org> Cc: "Curt, WE7U" <curt.w...@gmail.com> Sent: Wednesday, July 2, 2014 9:48 PM Subject: Re: [Xastir] Window Sizing and Shortcuts On Wed, Jul 02, 2014 at 06:18:41PM -0700, we recorded a bogon-computron collision of the <ja...@ke4nyv.com> flavor, containing: > Curt, > > The resolution is 800x480. Can I recompile the version I have installed? ?The > install was automated, so I have no idea if I can work with that or start > over. If I recall correctly, your install was done by running the script at http://www.175moonlight.com/xastir/raspbian-xastir-cvsbuild.sh with minor modifications. If so, all that "automation" was really just running what most of us do by hand on other systems. The script installs all the packages Xastir depends on, then downloads the CVS version of Xastir and builds it. To do what Curt's suggesting means skipping right to the last step after hacking the source --- you don't need to re-run the script, since you already have all the prerequisites. All you need to do to rebuild Xastir with that option is to do the following: - cd ~/src/xastir/src - cd ~/src/xastir/build - ../configure CPPFLAGS="-DLCD640x480TOUCH" This is the same as if you had edited main.c and uncommented an ifdef that Curt mentioned, but is a lot simpler than editing code. - make clean && make && sudo make install Then, launch Xastir as before, but change font sizes so that everything looks OK for you. While the "ifdef" has 640x480 in its name, there is nothing that actually uses the 640x480 size in the code --- it's just a shorthand for the specific use case Curt was experimenting with when he inserted this code. Ideally, selecting these options should be done in the "configure" script with an "--enable-touchscreen" option or something rather than by forcing CPPFLAGS or hand-editing code, but nobody has set it up that way. HTH, T. -- Tom Russo KM5VY SAR502 DM64ux http://www.swcp.com/~russo/ Tijeras, NM QRPL#1592 K2#398 SOC#236 http://kevan.org/brain.cgi?DDTNM echo "prpv_a'rfg_cnf_har_cvcr" | sed -e 's/_/ /g' | tr [a-m][n-z] [n-z][a-m] _______________________________________________ Xastir mailing list Xastir@lists.xastir.org http://xastir.org/mailman/listinfo/xastir