I had it working beautifully right up until a bug in Ubuntu took out the onboard wifi and bluetooth in the box. I found that between 40% to 50% volume with the squelch set at one was the best combination for my setup.
Now if I could figure out how to port Xastir to android. > Date: Sun, 16 Nov 2014 18:07:05 -0800 > From: [email protected] > To: [email protected] > Subject: Re: [Xastir] Xastir and Mobilinkd Tnc 1 Bluetooth tnc > > Sometime this can be distro specific. Pairing the Mobilinkd hasn't been a > problem > The deal is getting the gain set for reception and such for a particular rig. > Kurt KC9LDH > -------------------------------------------- > On Thu, 11/6/14, Bryan Irwin <[email protected]> wrote: > > Subject: [Xastir] Xastir and Mobilinkd Tnc 1 Bluetooth tnc > To: [email protected] > Date: Thursday, November 6, 2014, 8:14 PM > > I'm looking for a little help > here. I'm running Xastir 2.07 on Ubuntu 14.04 on a > Lenovo ideapad s10-3 and I want to use my Mobilinkd tnc with > it and I'm at a dead end. > > I can connect to the tnc in terminal using sudo rfcomm > connect 0 just fine but when I try to add it in the > interface control in xastir and start it I get an EACCESS > ERROR Interface Error! Error opening interface 0 Hard > Fail. I've tried the chmod command and am still > in the same place. > > Any help would be greatly appreciated. > > Bryan > KF5TOT > > > > _______________________________________________ > Xastir mailing list > [email protected] > http://xastir.org/mailman/listinfo/xastir _______________________________________________ Xastir mailing list [email protected] http://xastir.org/mailman/listinfo/xastir
