How do I check if the soundmodem process is running? I just did the apt-get install soundmodem.
I just installed sound modem because there was some documentation. If there is documentation on how to set it up, as long as it works, I will get direwolf. One of the reasons I ;like soundmodem is because it had a hidraw driver for PTT, which I am trying to get working with my CM108 sound card chip. I also like it because it has an easy config menu that I choose all of the settings. By the way, I get the same error independent of what interface I select on the menu ( although that might be expected because I don't have any other hard ware plugged in) On Mon, May 11, 2015 at 2:38 PM, David Ranch <[email protected]> wrote: > > Is the soundmodem process running? Xastir won't start it for you. Btw, > though soundmodem still works, it's been abandoned for years. You'll have > much better luck with Direwolf in the long run as it supports multi-bit > error correction and is under active development. > > --David > > > > On 05/11/2015 09:20 AM, Skyler F wrote: > >> I am having the interface error when I try to start my interface from the >> interface menu: >> >> Device 0 DOWN Serial KISS TNC /dev/soundmodem0 >> >> Now I click START >> >> It is still stuck on DOWN, and the terminal outputs: >> >> >> Interface Error! Error opening interface 0 Hard Fail >> >> I attempted the command: >> >> sudo chmod 4755 /usr/local/bin/xastir >> >> But it did not change anything, and gave me the same error. Is there >> anything else I should try? >> >> >> Thanks for the help, >> >> Skyler >> >> > _______________________________________________ > Xastir mailing list > [email protected] > http://xastir.org/mailman/listinfo/xastir > -- Skyler Fennell amsatnet.info KDØWHB [email protected] _______________________________________________ Xastir mailing list [email protected] http://xastir.org/mailman/listinfo/xastir
