I'm having an issue that I've researched for hours, and so far haven't had any luck thus far.
I have a weather station (Ambient Weather WS-1400-IP) that I get data from on a Raspberry Pi with Weewx. I upload the data to CWOP/APRS via WeeWx. I also am trying a Digipeater/iGate with Xastir. I was hoping I could easily just do bi-directional iGate to get my weather data to the RF APRS network. So far, I'm not even seeing my data on Xastir from the weather station. A few settings: Interface Control>TNC This one works, and both ways. http://www.4-7.us/xa1.png Interface Control>IS I receive some stations in, I'm not sure the pattern if missing. Passcode blanked http://www.4-7.us/xa2.png Configure station I've tried plain W7JBG and W7JBG-1 http://www.4-7.us/xa3.png Configure Defaults http://www.4-7.us/xa4.png And in /home/pi/.xastir/data/nws-stations.txt I have a: W7JBG W7JBG-13 http://www.4-7.us/xa5.png If needed I can get text or screenshots of other parts of Xastir to help clear my end up. Other links that may or may not help: http://www.findu.com/cgi-bin/wxpage.cgi?call=W7JBG-13 http://aprs.fi/info/a/W7JBG-1 So to clarify, my main problem is that I'm not seeing W7JBG-13 in Xastir at all. I've left it going for a few hours, and it never shows up. I search for it, and it's not found. Eventual goal is to run a Digipeater/iGate and bi-directional iGate to get my weather station on the RF APRS network. _______________________________________________ Xastir mailing list [email protected] http://xastir.org/mailman/listinfo/xastir
