First thing is to check the obvious. Did you check the "Digipeat?" box
on the KISS TNC interface? Or is it a full TNC that does digipeating on
its own? If so, the digipeater may need to be configured.
Also, my setup does digipeat, but the outbound digipeated transactions
do not show in the log. Are you sure you're not already digipeating, but
just don't think you are becuase you don't see it in the log?
Tom Henderson
On 01/17/2018 07:24 PM, Aaron Vogel wrote:
Hey there, I've gotten really far and just have 1 hurdle left to my goal of
creating a fill-in digipeater, but it's an important one: I can't get
Xastir to digipeat. Hoping the list can help.
Setup:
RPi 3 B running Jessie
TNC-Pi from TNC-X.com
Baofeng UV-82
DB-9 to Baofeng TNC cable
Situation:
Xastir is setup fine (other than not digipeating).
I have configured the TNC-Pi and APRS.fi as interfaces.
I can manually transmit and stations nearby hear me (verified on aprs.fi)
Looking at the log files or packet data display I even see the
automatically transmitted packets going out about once every 30 minutes at
the moment from my station.
What I don't see is any kind of digipeating going on.
Here's a screen grab of my interface setup for the TNC-Pi:
https://www.dropbox.com/s/x5m2sdq1fvxh3hc/Screenshot%202018-01-17%2017.21.17.png?dl=0
And here's my xastir.cnf file:
https://www.dropbox.com/s/vyl88yyldog3prf/xastir.cnf?dl=0
I don't think there's anything else I'd need to set but obviously I'm
missing something.
Thanks in advance,
Aaron
_______________________________________________
Xastir mailing list
[email protected]
http://xastir.org/mailman/listinfo/xastir
_______________________________________________
Xastir mailing list
[email protected]
http://xastir.org/mailman/listinfo/xastir
