I do have a feed from CWOP that I use with a filter for distance. If I
don't send a position beacon, I don't get anything back because distance
can't be calculated.
Tom Henderson
On 10/22/18 3:16 PM, Gerry Creager - NOAA Affiliate wrote:
I'm also wondering why it seems to be going through cwop1.aprs.org... We
shouldn't be getting it; we filter for weather packets. That's certainly
NOT a weather packet.
gerry
On Mon, Oct 22, 2018 at 2:35 PM Curt, WE7U <[email protected]> wrote:
On Mon, 22 Oct 2018, Tom Henderson wrote:
I had noticed that the position information for my Xastir digi wasn't
showing
up in my mobile (FTM-400). Today I was playing around with DireWolf and
noticed the "Unknown message type K" error. Is this something I have set
wrong in my Xastir config?
Strangely enough, when i create map objects and transmit their location,
the
location info works just fine.
Here's the error message I saw in DireWolf
KW4TOM audio level = 45(22/9) [NONE] ____|||||
[0.6]
KW4TOM>APX211,WIDE2-2:KW4TOM>APX211,TCPIP*:=3023.43NT08705.80W&PHG810073
to
all! Gulf Breeze Digi/iGate<0x0d>
Unknown message type K, Xastir
The unusual things I see are the 'T' where the '/' or '\' should be
between latitude and longitude (didn't consult the spec to see whether that
was valid or what it means), and the "PHG" is too long... I think you need
a space between the PHG numbers and the comment. I don't know why it says
"Unknown message type K", as the only K's I see are in the callsigns.
Ah, consulted the spec: 'T' is an alpha overlay, so that part should be
good.
--
Curt, WE7U. http://we7u.wetnet.net
"Debating an anti-gunner is like debating an arachnophobe about the
importance of spiders in the ecosystem." -Stephen Wright
Coordinate Converter (Android): http://www.sarguydigital.com
_______________________________________________
Xastir mailing list
[email protected]
http://xastir.org/mailman/listinfo/xastir
_______________________________________________
Xastir mailing list
[email protected]
http://xastir.org/mailman/listinfo/xastir
