On Saturday, December 8, 2018 10:55:48 AM PST Michael wrote: > Is anybody using Xastir with DRAWS on a RasberryPi? What is your > experience? Good, bad, indifferent? Compared to other modems like the > TNC-Pi? > > tnx es 73, > > Michael WA7SKG
DRAWS is only a sound card and can be used anywhere you use a regular sound card. Above and beyond the sound card it has an onboard GPS and PTT/CSQ lines that use the RPi GPIOs. It is not a complete solution. To make it work with Xastir still requires additional software that: a) Can use a sound card to decode/encode ax25 packets. b) Can use the RPi GPIO lines for PTT. c) Software to access the GPS (gpsd) if you're taking your RPi mobile. One of the software modems that can do this is Direwolf. For the GPS I presume you can use gpsd. Very likely none (or few) of us on the Xastir list have DRAWS boards but we can infer what it will do from the above information about DRAWS and our experience using other soundcards with Xastir. Direwolf is one of the best software modems available and when coupled with DRAWS should out perform most if not all other solutions. -- Ken - N7IPB Email: [email protected] JID: [email protected] SvxLink Repeaters: http://pnw220.wetnet.net PGP Sig: F42B EF90 3CD3 31C7 3056 122E 993A 7B2E 5138 C42A “Contrariwise,' continued Tweedledee, 'if it was so, it might be; and if it were so, it would be; but as it isn't, it ain't. That's logic.”
signature.asc
Description: This is a digitally signed message part.
_______________________________________________ Xastir mailing list [email protected] http://xastir.org/mailman/listinfo/xastir
