Did you use setparams script? The tnc needs to set to kiss mode settings. I built one and parameters never stayed stable even though the test points were checjed good. Steve kd5mkv
Get Outlook for Android<https://aka.ms/ghei36> ________________________________ From: Xastir <[email protected]> on behalf of Tom Henderson <[email protected]> Sent: Monday, January 21, 2019 11:32:30 AM To: [email protected] Subject: Re: [Xastir] Xastir wit Raspbeery Pi model # and pi-tnc Hello! When you say you installed it on the RPi, does that include the steps to enable the serial port in the section of the manual on configuring the Rasperry Pi? https://tnc-x.com/TNCPi.pdf After that, the TNC should work on either /dev/serial0 or /dev/ttyAMA0 Tom Henderson On 1/21/19 10:58 AM, Jim Darrough wrote: > Hi Guys. > > I need some help. I built the pi-tnc (version 2.0), and installed > it on a brand new RPi model 3. I installed Xastir, which works fine > over the internet, but I can't get the TNC to talk to the radio. I > never see any led's light up, so I fear I may either have > misconfigured the Pi, or maybe the Xastir settings. I am trying to set > up an I-gate and am using a maxtrac programmed for 144.39. > > ANyone got time to help an old guy? > > 73 Jim Darrough, KI7AY EM25pd > _______________________________________________ Xastir mailing list [email protected] http://xastir.org/mailman/listinfo/xastir _______________________________________________ Xastir mailing list [email protected] http://xastir.org/mailman/listinfo/xastir
