Direwolf can be gotten from GitHub, a external soundcard is needed and interface or combination like signalink, digirig, dra-30 or Dinah interfaces. Configure direwolf.conf script. Mainly device (soundcard) and ptt com /dev/ttyUSB0 RTS DTR port. Install xastir from GitHub as well, or repo for both. I used interface with soundcard, I am running rpi bullseye, I have not installed xastir but will try xastir how to rpi/Debian install from wiki. Its doable direwolf works great with xastir. Kd5mkv steve
Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows From: Steve Shuff<mailto:[email protected]> Sent: Wednesday, April 19, 2023 5:33 AM To: Xastir - APRS client software discussion<mailto:[email protected]> Subject: Re: [Xastir] Test Hi Liz Thanks for the reply.. I ask because I am looking for some advice on loading xastir and direwolf onto a Raspberry pi. I ran that setup a few years back on Raspbian and Python 2, I just wondered if it is compatible with Bullseye and Python 3. If anyone here could advise I would appreciate it. Thanks , Steve, G7NSJ On Wed, 19 Apr 2023, 11:17 , <[email protected]> wrote: > On Wed, 19 Apr 2023 10:43:15 +0100 > Steve Shuff <[email protected]> wrote: > > > Hello, Is this list still active , Anyone ? > > > > Certainly, active when required, slumbering otherwise. > > Liz > VK2XSE > _______________________________________________ > Xastir mailing list > [email protected] > http://xastir.org/mailman/listinfo/xastir > _______________________________________________ Xastir mailing list [email protected] http://xastir.org/mailman/listinfo/xastir _______________________________________________ Xastir mailing list [email protected] http://xastir.org/mailman/listinfo/xastir
