David / All I have the D72A connected to a RPi 4 via USB and have setup two interfaces in Xastir,
One for read-only: where the D72A runs in normal APRS12 mode and one for read-write where the D72A runs in KISS mode (packet12) The interface type is "Serial TNC w/GPS on AUX port /dev/ttyUSB0" When I start the interface, the link status on the Interface Control page/window will go to UP, then something happens (a timeout or ??) and it goes to ERROR. I can't find any log message that will tell me why the interface status changed. Played around with log levels on start up, capturing the stdout and searching, looking in whatever log files get generated etc. At one time, I had this working, before I screwed up my rpi installation and had to start from scratch. I've been using startup/stop scripts that I found out on the 'net for the d72a and been playing around to try to understand all the commands to the d72a, but point is when the the link status is UP everything seems to work, I see incoming data fine and likely could send out messages as well (though the link errors out so quickly I've not really tried, it seems irrelevant to tracing down whatever is causing the link status to go to ERROR) Just not sure how to trace the ERROR, nor what settings might affect this. Robert KA2CZU ________________________________ From: ROBERT SWITZER <robert_swit...@msn.com> Sent: Thursday, April 20, 2023 11:28 AM To: xastir@lists.xastir.org <xastir@lists.xastir.org> Subject: Re: Xastir Digest, Vol 798, Issue 1 Yes. In fact if anyone knows why my D72A interface always works for about 1 minute upon startup and then goes to ERROR, I would love to hear debugging ideas Robert KA2CZU Get Outlook for iOS<https://aka.ms/o0ukef> ________________________________ From: Xastir <xastir-boun...@lists.xastir.org> on behalf of xastir-requ...@lists.xastir.org <xastir-requ...@lists.xastir.org> Sent: Wednesday, April 19, 2023 3:00:01 PM To: xastir@lists.xastir.org <xastir@lists.xastir.org> Subject: Xastir Digest, Vol 798, Issue 1 Send Xastir mailing list submissions to xastir@lists.xastir.org To subscribe or unsubscribe via the World Wide Web, visit http://xastir.org/mailman/listinfo/xastir or, via email, send a message with subject or body 'help' to xastir-requ...@lists.xastir.org You can reach the person managing the list at xastir-ow...@lists.xastir.org When replying, please edit your Subject line so it is more specific than "Re: Contents of Xastir digest..." Today's Topics: 1. Test (Steve Shuff) 2. Re: Test (ed...@billiau.net) 3. Re: Test (Steve Shuff) 4. Re: Test (David Brooke G6GZH) 5. Re: Test (Jason KG4WSV) ---------------------------------------------------------------------- Message: 1 Date: Wed, 19 Apr 2023 10:43:15 +0100 From: Steve Shuff <steveshuf...@gmail.com> To: Xastir@lists.xastir.org Subject: [Xastir] Test Message-ID: <cadnpubevghshqq79oaxdsx_efnpcrfugj9baq3tekhtmtcq...@mail.gmail.com> Content-Type: text/plain; charset="UTF-8" Hello, Is this list still active , Anyone ? -- Steve ------------------------------ Message: 2 Date: Wed, 19 Apr 2023 20:17:31 +1000 From: ed...@billiau.net To: xastir@lists.xastir.org Subject: Re: [Xastir] Test Message-ID: <20230419201731.7a7a0...@zenbook2.billiau.net> Content-Type: text/plain; charset=US-ASCII On Wed, 19 Apr 2023 10:43:15 +0100 Steve Shuff <steveshuf...@gmail.com> wrote: > Hello, Is this list still active , Anyone ? > Certainly, active when required, slumbering otherwise. Liz VK2XSE ------------------------------ Message: 3 Date: Wed, 19 Apr 2023 11:33:32 +0100 From: Steve Shuff <steveshuf...@gmail.com> To: Xastir - APRS client software discussion <xastir@lists.xastir.org> Subject: Re: [Xastir] Test Message-ID: <CADNpUBHwMKL44zJ1XdU+cViFrDzfUVone+a=-wjapn0aboj...@mail.gmail.com> Content-Type: text/plain; charset="UTF-8" Hi Liz Thanks for the reply.. I ask because I am looking for some advice on loading xastir and direwolf onto a Raspberry pi. I ran that setup a few years back on Raspbian and Python 2, I just wondered if it is compatible with Bullseye and Python 3. If anyone here could advise I would appreciate it. Thanks , Steve, G7NSJ On Wed, 19 Apr 2023, 11:17 , <ed...@billiau.net> wrote: > On Wed, 19 Apr 2023 10:43:15 +0100 > Steve Shuff <steveshuf...@gmail.com> wrote: > > > Hello, Is this list still active , Anyone ? > > > > Certainly, active when required, slumbering otherwise. > > Liz > VK2XSE > _______________________________________________ > Xastir mailing list > Xastir@lists.xastir.org > http://xastir.org/mailman/listinfo/xastir > ------------------------------ Message: 4 Date: Wed, 19 Apr 2023 11:46:01 +0100 From: David Brooke G6GZH <xas...@dbrooke.me.uk> To: xastir@lists.xastir.org Subject: Re: [Xastir] Test Message-ID: <zd_garaj8j5bd...@cubitt.dbrooke.me.uk> Content-Type: text/plain; charset=us-ascii Hi Steve, On Wed, Apr 19, 2023 at 11:33:32AM +0100, Steve Shuff wrote: > I ran that setup a few years back on Raspbian and Python 2, I just wondered > if it is compatible with Bullseye and Python 3. If anyone here could advise > I would appreciate it. I've not actually tried it but both xastir and direwolf are available in the Raspbian Bullseye repository so I'd expect it to work. David G6GZH ------------------------------ Message: 5 Date: Wed, 19 Apr 2023 11:09:27 -0500 From: Jason KG4WSV <kg4...@gmail.com> To: Xastir - APRS client software discussion <xastir@lists.xastir.org> Subject: Re: [Xastir] Test Message-ID: <3c81a3e7-d9c8-4459-99b7-415e237b8...@gmail.com> Content-Type: text/plain; charset=utf-8 Xastir doesn?t use python. -Jason > On Apr 19, 2023, at 5:33 AM, Steve Shuff <steveshuf...@gmail.com> wrote: > > ?Hi Liz > Thanks for the reply.. > I ask because I am looking for some advice on loading xastir and direwolf > onto a Raspberry pi. > I ran that setup a few years back on Raspbian and Python 2, I just wondered > if it is compatible with Bullseye and Python 3. If anyone here could advise > I would appreciate it. > Thanks , > Steve, G7NSJ > >> On Wed, 19 Apr 2023, 11:17 , <ed...@billiau.net> wrote: >> >> On Wed, 19 Apr 2023 10:43:15 +0100 >> Steve Shuff <steveshuf...@gmail.com> wrote: >> >>> Hello, Is this list still active , Anyone ? >>> >> >> Certainly, active when required, slumbering otherwise. >> >> Liz >> VK2XSE >> _______________________________________________ >> Xastir mailing list >> Xastir@lists.xastir.org >> http://xastir.org/mailman/listinfo/xastir >> > _______________________________________________ > Xastir mailing list > Xastir@lists.xastir.org > http://xastir.org/mailman/listinfo/xastir ------------------------------ Subject: Digest Footer _______________________________________________ Xastir mailing list Xastir@lists.xastir.org http://xastir.org/mailman/listinfo/xastir ------------------------------ End of Xastir Digest, Vol 798, Issue 1 ************************************** _______________________________________________ Xastir mailing list Xastir@lists.xastir.org http://xastir.org/mailman/listinfo/xastir