If you look on the node, you will see in /tmp/mypostscript , this is the script that runs after install. The last thing that is done is to run updateflag.awk $MASTER 3002 "installstatus booted" which is going to send the status over port 3002 to $MASTER. $MASTER should be defined above in the script in an export, like below. If for some reason we cannot contact the Management Node by the address that is there, then the booted status never gets set.
For example: /tmp/mypostscript: . . MASTER=10.16.0.103 export MASTER . . . updateflag.awk $MASTER 3002 "installstatus booted" You could check /var/log/xcat/xcat.log on the node also. Lissa K. Valletta 2-3/T12 Poughkeepsie, NY 12601 (tie 293) 433-3102 From: Dario Dorella <[email protected]> To: [email protected] Date: 10/17/2011 10:13 AM Subject: [xcat-user] updateflag.awk hangs forever? Hi Lissa, I don't think this is network related: "tcpdump" and "netstat" showed the right stuff. Again, how can I get an insight on what xCATd is thinking? Thx, Dario ------------------------------------------------------------------------------ All the data continuously generated in your IT infrastructure contains a definitive record of customers, application performance, security threats, fraudulent activity and more. Splunk takes this data and makes sense of it. Business sense. IT sense. Common sense. http://p.sf.net/sfu/splunk-d2d-oct _______________________________________________ xCAT-user mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/xcat-user ------------------------------------------------------------------------------ All the data continuously generated in your IT infrastructure contains a definitive record of customers, application performance, security threats, fraudulent activity and more. Splunk takes this data and makes sense of it. Business sense. IT sense. Common sense. http://p.sf.net/sfu/splunk-d2d-oct _______________________________________________ xCAT-user mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/xcat-user
