Dear all:
When I update CMOS setting of system x3650 M4 wich batch like this :
"""""""""""""""""""""""""""""""""""""""""""""""""""""""
====================================
IMM.PowerRestorePolicy=Restore
BootOrder.BootOrder=Legacy Only=PXE Network=Hard Disk 0
POSTAttempts.POSTAttemptsLimit=3
Processors.TurboMode=Enable
Processors.Hyper-Threading=Disable
Memory.MemoryPowerManagement=Disabled
DevicesandIOPorts.RemoteConsole=Enable
DevicesandIOPorts.SerialPortSharing=Enable
DevicesandIOPorts.SerialPortAccessMode=Dedicated
DevicesandIOPorts.Com1TerminalEmulation=VT100
DevicesandIOPorts.Com1ActiveAfterBoot=Enable
DevicesandIOPorts.Com1FlowControl=Hardware
DevicesandIOPorts.Slot1Riser1Slot1PCIeSpeed=Gen3
DevicesandIOPorts.Slot2Riser1Slot2PCIeSpeed=Gen3
DevicesandIOPorts.Slot3Riser1Slot3PCIeSpeed=Gen3
DevicesandIOPorts.Slot4Riser2Slot1PCIeSpeed=Gen3
DevicesandIOPorts.Slot5Riser2Slot2PCIeSpeed=Gen3
DevicesandIOPorts.Slot6Riser2Slot3PCIeSpeed=Gen3
Power.PowerPerformanceBias=Platform Controlled
Power.PlatformControlledType=Efficiency - Favor Performance
OperatingModes.ChooseOperatingMode=Custom Mode
********************************************************************
after this , rpower it reset , then it has this problem : "DHCP(net0
)...................................Connection timed out
No more network devices
PXE-MOF:Exiting Intel Boot Agent "
I had checked my xcat table,network,dhcp,dns when appear this problem.but it
still like this.
so,if anyone who has the way to solve this problem ,please share with me ,thank
very much!
<<attachment: graycol.gif>>
------------------------------------------------------------------------------ For Developers, A Lot Can Happen In A Second. Boundary is the first to Know...and Tell You. Monitor Your Applications in Ultra-Fine Resolution. Try it FREE! http://p.sf.net/sfu/Boundary-d2dvs2
_______________________________________________ xCAT-user mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/xcat-user
