for now, try yum install xCAT-genesis-x86_64 if CentOS or RedHat... FYI 2.7.2 should amend the requirements so this would not be necessary.
From: Wojciech Turek <woj...@gmail.com>
To: xCAT Users Mailing list <xcat-user@lists.sourceforge.net>,
Date: 05/01/2012 09:18 AM
Subject: Re: [xcat-user] auto discovery problem - cat: can't open
'/tmp/dhcpserver': No such file or directory
Hi,
This is a new Dell C6xxx system (a chassis with for "stick" servers). Yes I
though that the lack of network module may be a cause as the ifconfig
injected into getdestiny script only shows lo interface. The system uses
intel igb driver I believe.
I was following
http://sourceforge.net/apps/mediawiki/xcat/index.php?title=XCAT_iDataPlex_Cluster_Quick_Start
which may be now outdated to some extent especially for a new hardware.
I am using xcat-2.7, sowhat I need to do to use the new genesis
environment ?
Many thanks for your help.
Wojciech
On 1 May 2012 13:56, Jarrod B Johnson <jbjoh...@us.ibm.com> wrote:
What model of system is it? FYI, in 2.7, the package
'xCAT-genesis-x86_64' replaces nbroot with an environment with more
drivers. That is usually the cause of the message you see, no driver for
the network device...
Inactive hide details for Wojciech Turek ---05/01/2012 08:32:01 AM---Hi I
am attempting to boot a new node using auto discoveryWojciech Turek
---05/01/2012 08:32:01 AM---Hi I am attempting to boot a new node using
auto discovery mode. The node
From: Wojciech Turek <woj...@gmail.com>
To: xCAT Users Mailing list <xcat-user@lists.sourceforge.net>,
Date: 05/01/2012 08:32 AM
Subject: [xcat-user] auto discovery problem - cat: can't open
'/tmp/dhcpserver': No such file or directory
Hi
I am attempting to boot a new node using auto discovery mode. The node
boots into xnba kernel but then fails at getdestiny script and goes
into loop showing following errors
cat: can't open '/tmp/dhcpserver': No such file or directory
grep: /tmp/destiny: No such file or directory
grep: /tmp/destiny: No such file or directory
I have done some investigation but got stuck and can not find where
the /tmp/dhcpserver should be created and populated with data, any
help will be greatly appreciated.
Best regards
lsdef sand-1-59
Object name: sand-1-59
bmc=sand-1-59
bmcpassword=XXXXXX
bmcusername=root
chain=runcmd=bmcsetup,netboot=pxe
cons=ipmi
groups=compute,nodes,rack1
hostnames=sand-1-59.xcat.cluster
installnic=eth0
ip=10.143.1.59
mgt=ipmi
netboot=pxe
nfsserver=10.143.255.100
postbootscripts=otherpkgs
postscripts=syslog,remoteshell,syncfiles
primarynic=eth0
serialflow=hard
serialport=1
serialspeed=115200
switch=stack01
switchport=gi2/0/14
tftpserver=10.143.255.100
------------------------------------------------------------------------------
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and
threat landscape has changed and how IT managers can respond. Discussions
will include endpoint security, mobile security and the latest in malware
threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
_______________________________________________
xCAT-user mailing list
xCAT-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/xcat-user
------------------------------------------------------------------------------
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and
threat landscape has changed and how IT managers can respond. Discussions
will include endpoint security, mobile security and the latest in malware
threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
_______________________________________________
xCAT-user mailing list
xCAT-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/xcat-user
------------------------------------------------------------------------------
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and
threat landscape has changed and how IT managers can respond. Discussions
will include endpoint security, mobile security and the latest in malware
threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
_______________________________________________
xCAT-user mailing list
xCAT-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/xcat-user
<<inline: graycol.gif>>
------------------------------------------------------------------------------ Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
_______________________________________________ xCAT-user mailing list xCAT-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/xcat-user
